datamaster run

Mike

New member
Last week i swapped out my stock injectors for 42's and changed the plugs (gap at .032) and wires also. While i had the upper intercooler off i replaced the pcv valves lines and grommets as well.

http://www.mediafire.com/?mwyd1myneyd

Attached is a link to a datamaster run that i just took today. If anyone has time, could you take a look at it for me and let me know what you think? I noticed the big KR jump in there but im not too great at reading them. my signature has a list of the mods that im running and the tune was given to me by wyosyclone

Thanks,
Mike
 

turbodig

Active member
Re: datamaster run

Last week i swapped out my stock injectors for 42's and changed the plugs (gap at .032) and wires also. While i had the upper intercooler off i replaced the pcv valves lines and grommets as well.

http://www.mediafire.com/?mwyd1myneyd

Attached is a link to a datamaster run that i just took today. If anyone has time, could you take a look at it for me and let me know what you think? I noticed the big KR jump in there but im not too great at reading them. my signature has a list of the mods that im running and the tune was given to me by wyosyclone

Thanks,
Mike

Which file did you use... Rob's 40# starter?

*Edit - never mind.*

Your wideband isn't working, or is set up wrong.

Assuming street gas, you have way too much boost in low gears.
Boost control tables will have to be tweaked.

I suspect you've got a loose motor mount, or a fuel line tapping, or a downpipe hitting the frame.

You also have an intercooler problem, unless it's 100+ outside.
 
Top