DIY WB +/- 4VDC??

myclone

Donating Member
Ive looked over the DIY WB schematics and am curious where the +/- 4VDC is being picked up from? Ive been over the prints quite a few times in prep for building this thing and dont see where its coming from.. Am I just being moron and over looking the obvious or did I miss something in the text(I left my text docs at home)?

TIA
 

TurboTony

Active member
Ummmm....

Not too sure what ya mean. I've assembled a few of these things now, never run into anything about 4vdc.


Tony
 

myclone

Donating Member
By the prints I have the +/- 4VDC is used for the VCC of U2A, neg side of C14, pin 3 of the P52501, pin 3 of U3B, etc, etc.. Prolly a dozen other places that require -4VDC according to the prints that I got from the DIY WB site.

Dont tell me I got the wrong/old schematics.... I spent ~6hrs redrawing all three pages of the ckt onto one page for ease of use. :-?
 

TurboTony

Active member
Hmmmm, I'm thinkin that you are way deeper into than I ever was.

I just got the board from the DIY site and installed the parts. I follwed the test procedure and everything worked out fine.

Here's the link for the test if ya don't have it already.

http://www.diy-wb.com/diywbchk.htm

HTH

Tony
 

myclone

Donating Member
Ohhhh... Im building my own PC board and hard wiring it(no traces on board).

Already got the link but thanks anyway. Eh.. :wink:
 

TurboTony

Active member
Wow, that seems like an awfull lot of work.

Last we checked the boards and parts kits were still available. I think they were only asking around 20 bux for the set. Why did you decide to build it from scratch?

Tony
 

myclone

Donating Member
TurboTony said:
Wow, that seems like an awfull lot of work.

Last we checked the boards and parts kits were still available. I think they were only asking around 20 bux for the set. Why did you decide to build it from scratch?

Tony

I read somewhere while researching that ppl were having issues getting the board/parts kit. I saw it on the DIY FI list archives or something similar.

Is this where you guys are getting the boards/parts kit(links at bottom of the page)?
http://www.diy-wb.com/info.htm

FWIW.. Here is one page of the schematics that I am using(correct print?).. Notice U2A pin 11 has -4VDC tied to it that I mentioned?

ftp://diy-efi.org/pub/diy_efi/project_files/diy_wb1/diy-wb-b.gif
 

jwaller

Evil Genius/SyTy Guru
how about you put something bigger on the freakin page?....holy crap that is one huge pic...
 

myclone

Donating Member
That better professor mini monitor? That +/-4VDC still bugs me though.

FWIW.. I ordered the prefabbed boards. We'll see if I get em I guess.
 

jwaller

Evil Genius/SyTy Guru
hey bro I have a 21" monitor and "it still wouldnt fit"....but thats another story... anywho
 

myclone

Donating Member
jwaller said:
hey bro I have a 21" monitor and "it still wouldnt fit"....but thats another story... anywho

You know I like it when you talk dirty...

FYI, I got the boards and am waiting on the parts kits to arrive. Hopefully by that time the WB O2s will be available again. :roll:
 

TurboTony

Active member
Hey Dave,

Lemme know if you need a w/b sensor. I have an outlet here that will sell them for a fairly reasonable price.

Tony
 

turbodig

Active member
myclone said:
Ohhhh... Im building my own PC board and hard wiring it(no traces on board).

Already got the link but thanks anyway. Eh.. :wink:

I've got a coupla extra boards I'd part with... parts kits too.
Might save ya from having to do it the hard way.

Personally, I think it'd be fairly cool to do a WB with all SM parts... like
shirt-pocket sized.

Later,

Dig
 
Top