does my head porting work look ok

[syclone0209]

let me know what you think of my port work.
http://s295.photobucket.com/albums/mm158/syclone0209/

 

[Ry368]

Re: does my head porting work look ok

Looks good....what do they flow now after your port work?

 

[syclone0209]

Re: does my head porting work look ok

i couldnt find anyone even close to me with a flow bench. seems hard to find one these days. i would hope atleast 250-275

 

[It's just a six]

Re: does my head porting work look ok

Looks OK,
but it's hard to say just from pics.
Unless you took away a lot of material ,like almost to the water jackets,you will not be close to 275 cfm. 28 inches HG
You look like you have some experience prior to these heads??
Get them flow tested & lets hear what they flow.

 

[It's just a six]

Re: does my head porting work look ok

Fully race-ported flowing 275 cfm @ 28" water with 2.055/1.60 valves, potential is approx.
http://www.nastyz28.com/forum/showthread.php?t=56505

 

[turbodig]

Re: does my head porting work look ok

let me know what you think of my port work.
http://s295.photobucket.com/albums/mm158/syclone0209/

Are you gonna put bronze guides in there? You took a lot off the guide boss, especially on the exhaust side..