engine wiring routing ?

vmack

New member
searched for a while and could not find a good pic,google too.anyway little help with were these hook up. looks like big loops are ground back of head maybe, smaller hook to upper terminal on block???,Fuse holder goes???? there are no open holes in the firewall and I don't want to just but it any place. here is a pic if u could post a pic that would be great or just let me in on the secert of were this stuff goes. THANKS
101_0333.jpg
 

Injected1

Member
Re: engine wiring routing ?

The large black ground goes on lower intake manifold bolt. The rest go to the back of the alternator.
 

SY-1193

Active member
Re: engine wiring routing ?

searched for a while and could not find a good pic,google too.anyway little help with were these hook up. looks like big loops are ground back of head maybe, smaller hook to upper terminal on block???,Fuse holder goes???? there are no open holes in the firewall and I don't want to just but it any place. here is a pic if u could post a pic that would be great or just let me in on the secert of were this stuff goes. THANKS
101_0333.jpg

The large black ground goes on lower intake manifold bolt. The rest go to the back of the alternator.
That is not Correct.... The Tan/White wire is not a positve wire it goes to ground!
___________________________________________________________________________________________________________

Black and Tan/White wires go to ground. Bolt is front of lower intake manifold next to alternator.
The two Orange and the red go to the alternator positve post.
 

vmack

New member
Re: engine wiring routing ?

ok, this end of the harness is for the alt. I get that now thanks alot. does the fuse just hang there? Also the battery is in the back of the truck could these be some type of 1 wire alt swap. There are all types of wires every were in here all aftermarket I putting this together and did not take it apart or add any of the aftermarket stuff
101_0334.jpg
 

Quickstop [UK]

Combating adversyty.
Re: engine wiring routing ?

Run a negative from the batt to the alt. Fuse does hang there but you can try and connect it to the back of the alt if you want. The wires make it hard as they are short.
 

vmack

New member
Re: engine wiring routing ?

Did u see in the pic there are 2 conectors for the alt 1 from the alt itself 1 from the harness?
 

SY-1193

Active member
Re: engine wiring routing ?

The one is for the alternator - comes out with all the other alternator wiring wires - plugs right in the side of alternator can't mess that up it only fits the alt. wire colors are Pink/Black and Brown. The other looks like the A/C compressor connector - harness runs on the other side of intake. Wires for the A/C compressor are Green/White and Black - just pull the covering back and check.

NEXT????
 

vmack

New member
Re: engine wiring routing ?

If u see in the pic the same conector that is in the harness is hard wired to the alt . it is kinda hard to see
 
Top