That doesn't mention hotwiring the IC pump. The ECM doesn't turn on the IC pump until it's way too hot to do any good. If you T in a ground wire to the yellow wire on the passenger-side relay on the firewall, the pump will run whenever the truck is on. That keeps the coolant flowing through the heat exchanger, and thus keeping the incoming air cooler and denser.
For pretty cheap, you can also
replace the metal IC lines. Insulated rubber hoses keep the coolant from soaking up extra heat, unlike the stock metal lines that are bolted to the engine.
A lot of trucks aren't as fast as they could be simply because they haven't been kept up properly. Check out the FAQ and Readme to the left...