Gauge/Tuning Question

colinm5

New member
Im starting to put a little money into my ty besides, so Im going to start with tuning. Im planning on getting a 3 gauge pillar with a/f,fp, and boost. Along with that all the necessary tuning hardware/software. My question is the autometer a/f guage includes an o2 sensor, so would i still need to buy another wideband sensor, such as the LC-1?(I plan on getting the detriot turbo kit)

http://www.autometer.com/cat_gaugedetail.aspx?gid=3605&sid=7

Any suggestions/advice are greatly appreciated. Im new at all of this(Im 17) so im all hears. thanx in advance.

Also which gauge pod do u guys prefer(company)?
 

DynaGlide

Ton-Eighty
Re: Gauge/Tuning Question

Smart choice to start with tuning. It is extremely important to understand what everything is doing with fuel, spark, timing, etc. You can put the biggest turbo on your truck and go nowhere if you don't know how to make it work right. Plus, tuning is comparatively cheap.

Lotek, I think is the name of pillar pod that I have. I could be wrong though. An a/f gauge is helpful to get an idea of your fuel stoichiometry, but an even better, more accurate (and expensive) tool is a wbo2. The boost gauge is pretty much a must. You'll get mixed opinions, but the three gauges I have are a/f, boost, and oil pressure.

Good luck; have fun.

Sam
 

turbodig

Active member
Re: Gauge/Tuning Question

colinm5 said:
Im starting to put a little money into my ty besides, so Im going to start with tuning. Im planning on getting a 3 gauge pillar with a/f,fp, and boost. Along with that all the necessary tuning hardware/software. My question is the autometer a/f guage includes an o2 sensor, so would i still need to buy another wideband sensor, such as the LC-1?(I plan on getting the detriot turbo kit)

http://www.autometer.com/cat_gaugedetail.aspx?gid=3605&sid=7

Any suggestions/advice are greatly appreciated. Im new at all of this(Im 17) so im all hears. thanx in advance.

Also which gauge pod do u guys prefer(company)?

Shouldn't need to buy an additional wide-band, although I can't say for sure whether the available wide-band patches will support the auto-meter's range.

See if autometer has a voltage to AFR table for their sensor, then we can tell ya for sure.
 

colinm5

New member
Re: Gauge/Tuning Question

I was thinking of having the gauge to just keep an eye on things without having to get the laptop out everytime. But 380(with sensor) is kinda steep. even if you could get it without an o2 sensor it would still be around 280.
 
Top