Bill Z
Donating Member
Just rebuilt my motor and re-installed it last weekend. Got 80 miles on the new engine. Nothing spectacular. Quite ordinary. 30 over pistons, new stock springs and Comp Cam lifters with a stock cam. Fresh heads with new valve grind. Stock injectors with stock chip and MAP sensor. Stock, stock, stock.
It hasn’t generated any codes (yet).
It does run somewhat different now.
I was wanting to make some Datamaster files and have someone look at them to tell me if all is OK or suggest some changes.
Before I make the files I was wondering if there is certain stuff that I should be doing as I am making the files. Like should I just drive normal and easy from zero to 60 and back to zero for one run. Then launch from 5 pounds through 80 MPH letting the trans shift at will.
What are the better scenarios to evaluate the tune I got on this engine?
Let me know if you want to help and what you want to see. I will create the files and e-mail them to you.
Thanks for any help.
It hasn’t generated any codes (yet).
It does run somewhat different now.
I was wanting to make some Datamaster files and have someone look at them to tell me if all is OK or suggest some changes.
Before I make the files I was wondering if there is certain stuff that I should be doing as I am making the files. Like should I just drive normal and easy from zero to 60 and back to zero for one run. Then launch from 5 pounds through 80 MPH letting the trans shift at will.
What are the better scenarios to evaluate the tune I got on this engine?
Let me know if you want to help and what you want to see. I will create the files and e-mail them to you.
Thanks for any help.