Easy swap. If you can remove your cap and rotor, you can do your module.
Pull the cap and rotor then you will find a plastic device that has two obvious connectors with wires running off towards the firewall. Remove the connectors, remove the two bolts holding the module and swing it towards the passengers side. Then the 3rd connector will become apparent. Undo it and you are home free. Now, carefully clean the surface that the old module was mounted to, then apply the heat conducting creme (that will come with your new module) to the bottom of your new module and then reverse the above to secure the new one in place.
_________________
Daron
1992 Typhoon Blue/Gray
1991 Syclone Best 1/4 12.42 @ 106.1
Member Of Freakin' Ohio (MOFO) SyTy
<font size=-1>[ This Message was edited by: Daron on 2002-03-18 23:14 ]</font>