Im lost, need help.

bender

Member
I drove the truck to work, everything was fine. I started to come home tonight, let it warm up and then started home. After about 2 miles I stopped at a stop sign and when I went to take off, it stumbled as I gave it some gas. Then it was fine but the check engine light came on. I looked at my autometer boost gauge and it was stuck at 0psi. I pulled into a parking light to check if one of the vac lines came loose and they were both fine. So I drove home and checked the mail and lucky for me the aldl cable Mr Rockwell is lending me was there so I ran inside to get the laptop.

I hooked the truck up and did a monitor and it was throwing only code 43. I pulled the ecmb fuse for a coupe minutes while I searched code 43. Anyhow I replaced fuse and fired the truck back up. No code, so I took it for a little drive down the road, The thing I dont get is the knock count was 2518 at idle and stayed there for most of the drive with knock retard staying at 0.0, I got on it twice to about 3500rpm, the first time nothing changed, the second the knock count went to 2855 and stayed there till I shut it off, when it jumped it pulled 1.5 degrees of knock retard. I dont know if I am getting reliable data.

I downloaded the trial of datamaster, it says the 91-93 4.3l turbo under about, so I think its right. It only says my target boost though is 6.5psi.
 

WyoSyclone

Active member
Re: Im lost, need help.

The knock count number in DM is kind of screwy.... you can search for "Tooky", and read his tuning papers.... he explains how in one revision of DM the knock count number became strange... you really just have to look at the KR number for trouble.
 
Top