Got this off of http://members.home.net/unskarred/3_bar_chip_information.htm, could this be the reason why some of us have knock. What if I change to T2 or T3? I am going to toss this thing if this is the case
"Timing
A bit ago, someone expressed concern that our chip had more aggressive timing than stock in our T1 level chip. I made that program to be as close to stock as possible, but seeing as there are multiple timing tables, it may not be exactly close to stock. If you are having issues that you think are related to our chip having too much timing in the T1 level, it can't be by more than 1-3 degrees (in my opinion), so just reset your timing with a timing gun to a few degrees retarded. I've seen trucks run great in this configuration."
_________________
2001 Silver Grand Prix GTP
2000 Red Corvette FRC
1993 White GMC Typhoon
<font size=-1>[ This Message was edited by: StonesKid on 2001-11-10 10:40 ]</font>
"Timing
A bit ago, someone expressed concern that our chip had more aggressive timing than stock in our T1 level chip. I made that program to be as close to stock as possible, but seeing as there are multiple timing tables, it may not be exactly close to stock. If you are having issues that you think are related to our chip having too much timing in the T1 level, it can't be by more than 1-3 degrees (in my opinion), so just reset your timing with a timing gun to a few degrees retarded. I've seen trucks run great in this configuration."
_________________
2001 Silver Grand Prix GTP
2000 Red Corvette FRC
1993 White GMC Typhoon
<font size=-1>[ This Message was edited by: StonesKid on 2001-11-10 10:40 ]</font>