Massive oil leak...

Robert Lone

MUTANT
Both sides of the block are covered near the back along with the entire undercarage of the truck.

Valve covers, intake, oil return from the turbo, remote oil filter sending...all are not the problem.


The only thing I can think of is the turbo sending line which does not appear to leak...


WTF???

1/2 gallon in 300 miles...

Any ideas???
 

Norm

Donating Member
Re: Massive oil leak...

sounds like all that is left to leak is the crank seal.
 

turboj91

New member
Re: Massive oil leak...

2 qts in 300 miles is either a massive drip or something with full engine oil pressure that is now leaking. I would lean toward the latter.
 

turbodig

Active member
Re: Massive oil leak...

Crack in the brass fitting that the oil pressure sender mounts to?

Rubbed a hole in the turbo supply line?
 

Don W.

Stab it and steer it
Re: Massive oil leak...

Dig is on it. Also check the oil pressure sender itself. After that serious over pressure in the crankcase pushing oil past both rocker covers at the same time? Seems unlikely. Have you added an external oil pressure ga? Maybe something there.
 

Windedv6

Ty n 10s
Re: Massive oil leak...

I have blown out the sealant on the back lifter valley wall before. You may not find it idling, but when going down the road or track with some crankcase pressure and plenty of oil in the lifter valley, you will return to the garge with oil running down the back of the block. The only fix is to take off your intake and seal it.

John
 

Robert Lone

MUTANT
Re: Massive oil leak...

I have blown out the sealant on the back lifter valley wall before. You may not find it idling, but when going down the road or track with some crankcase pressure and plenty of oil in the lifter valley, you will return to the garge with oil running down the back of the block. The only fix is to take off your intake and seal it.

John

Thanks for the input but that was the first thing I checked...I is now pulling hair out...:rotf:
 
Top