Need a 65# starter bin ASAP

Injected1

Member
Hey guys everyone keeps telling me that there is a 65# starter bin on code59 but I can't seem to find one and I really need one. My build consists of:

SyTy block bored .030
Mildly ported Vortecs
Comp cam valvetrain 1.6 full rollers
Cometic head gaskets
65# Racetronix Injectors
415 Cam
TRW L2441 pistons
Pte 67 gtq turbo
Atr headers, dp and exhaust
Synapse WG and BOV
SyTy race 700r4
Yank 3600 stall converter
3bar MAP
MSD Street Blaster coil (UR6's gapped .030)
AEM Wideband
Eboost2 controller
Aeromotive fuel pump & reg (set to 40psi)
No A/C

Please help me out. I would really love to drive my truck soon.
 

turbodig

Active member
Re: Need a 65# starter bin ASAP

There's 2 of them in the download area. 60s are often referred to as 65s, which might be causing the confusion.

(Assuming you're referring to the siemens/mototron hi-z injectors)
 

Big Mike

New member
Re: Need a 65# starter bin ASAP

Remember any Bin you get is only going to be a starter bin which may get your truck running then you need to start tuning for your truck, with that 3600 stall converter your turbo will probably spool very quick which will throw out all the base bins out there, ease into boost when your ready and watch the Knock Gauge on Tuner Pro Rt, keep the boost down also till your ready, Just because you have a base bin for the size of injectors your running does not mean you can go all out and blast down the 1/4 mile. Your time and effort will pay off in the end.
 

turbodig

Active member
Re: Need a 65# starter bin ASAP

Pm sent

Are those injectors comparable to the Racetronix 65#'ers?

Depends on what you're calling a 65er.

Racetronix doesn't make injectors, afaik. They buy them from a supplier.

They appear to offer:
65# low-z Delphi injectors
63# hi-z Siemens (Mototron) injectors.
66# hi-z SMP injectors

So, depending on what you got, it could make a big difference as to what bin you should be running, whether the ECM will need to be modified, if you need to make wiring harness changes, etc.

The 63# Siemens are what many people call 65s, or 60s. They are a skinny pencil-like injector.
All of the better 60# bins floating around out there are for these injectors.
 

Injected1

Member
Re: Need a 65# starter bin ASAP

Cool I will let you know when they arrive tomorrow. I ordered them from Scott at Detroit Turbo. Do you know what they will be?
 

BoostedSUV

Active member
Re: Need a 65# starter bin ASAP

Cool I will let you know when they arrive tomorrow. I ordered them from Scott at Detroit Turbo. Do you know what they will be?

Those would be the siemens(motron) 63#ers that Dig is refering to. Those are the ones I bought from racetronix and they are the same part# as the Detroit turbo 65s
 
Top