Need Dm cable BAD

TYTILIDIE

METH HEAD
DAN!!! thanks a lot for all your help. I finally got it working. Took me a while to notice but the junction to pin 16 from the reg was off. I had it after the capacitor to pin 2 when it should've been before. So far works like a charm. Now I just have to figure out how to read everything, lots of KR.

MIke
 

PPI Typhoon

DIY Madman
typhooner0073 said:
DAN!!! thanks a lot for all your help. I finally got it working. Took me a while to notice but the junction to pin 16 from the reg was off. I had it after the capacitor to pin 2 when it should've been before. So far works like a charm. Now I just have to figure out how to read everything, lots of KR.

MIke

Awesome! Glad to hear it Mike. :tup: I'm sure it feels good to finally figure it out. :rock: I had a time with my first one as well, but messing around with it is half the fun. :cool:

Happy datalogging! :p
 

Rawpwr7

Donating Member
i made the cable also..when i connect it DM TT says that my pcm is not the correct version???? but the cable communicates with the PC?????
 

PPI Typhoon

DIY Madman
Rawpwr7 said:
i made the cable also..when i connect it DM TT says that my pcm is not the correct version???? but the cable communicates with the PC?????

So you can open up through Hyperterminal and you get echo of what you type?? I'm not sure I've seen that error message before, but I would imagine it is easily corrected. The circuit is pretty simple.

Post back if Hyperterminal works and we'll go from there.

If you aren't familiar with what I'm talking about. Go to Hyperterminal on your computer (it's under the Accessories > Communications in the start menu). Open a new connection (named whatever you want) and set the communication through COM1. Set the bitrate to 9600 or so, and start the connection. If your MAX232 chip is powered up correctly, it will echo anything you type in the window. If you get nothing or gibberish shows up (not what you typed), then there is a problem.

I'm sure it's fixable. :D
 

PPI Typhoon

DIY Madman
Rawpwr7 said:
I also have a mastach cable and it does the same thing.
Hyperterminal works fine?????

Well, if the Mastach does the same thing........I am quite sure that it's a problem with the truck. I'd look into tracing the wires before trying to get another cable to fix what isn't broken.......... :2cents:
 
Top