warsaw
Sy#1012
ok i have done a tune up. msd cap /rotor /wires/plugs are ngk ur5 /pre gap 0.35. i bought data master and tuner pro.replaced my vacuum lines.put a cone on the turbo from autozone.engine breather and a new boost gauge.ok now here comes the questions there are check valves on the vacuum lines are they needed cause i think i left some off ?.im also useing pump gas 91 octan. im also geting boost spikes and im getting knock and i cant understand why.i have went over the info in www.powertuneplus.com now what im asking is can some one come and take a look at my truck that lives in denver that knows alot about syty i will pay you $$$ or let you use my data master when ever you need. ok now this is why i did some highway runs at wot and it felt like some thing major loss of power it realy got my attention. i thought my tranny took a crap at 80 mph so i got off the highway and gave it some gas and she still ran so dont know what that was about ? so i pulled over and unpluged the sensor that controls the boost. so i can get low boost and did another wot on the way home but dident want to push my luck so it wasent that great of a run.i can also email the runs if any can take a look at them. thank for your time.
[/IMG]
[/IMG]