need some help in denver

warsaw

Sy#1012
ok i have done a tune up. msd cap /rotor /wires/plugs are ngk ur5 /pre gap 0.35. i bought data master and tuner pro.replaced my vacuum lines.put a cone on the turbo from autozone.engine breather and a new boost gauge.ok now here comes the questions there are check valves on the vacuum lines are they needed cause i think i left some off ?.im also useing pump gas 91 octan. im also geting boost spikes and im getting knock and i cant understand why.i have went over the info in www.powertuneplus.com now what im asking is can some one come and take a look at my truck that lives in denver that knows alot about syty i will pay you $$$ or let you use my data master when ever you need. ok now this is why i did some highway runs at wot and it felt like some thing major loss of power it realy got my attention. i thought my tranny took a crap at 80 mph so i got off the highway and gave it some gas and she still ran so dont know what that was about ? so i pulled over and unpluged the sensor that controls the boost. so i can get low boost and did another wot on the way home but dident want to push my luck so it wasent that great of a run.i can also email the runs if any can take a look at them. thank for your time.
highway2.jpg
[/IMG]
highway3.jpg
[/IMG]
 

TYTILIDIE

METH HEAD
Re: need some help in denver

The numbers in your datalog are very odd. For instance you have 22* of retard and your spark advance is 19*. First of all, once in boost SYTY's dont ask for that much timing. 19+22=41*. We don't run that much timing. Either you you should find a screen shot that does not have a data error or something is seriously wrong. Your first screen shot says 27psi. I would double and triple check your wastegate solenoid and make sure it is hooked up right. You could be over boosting or again, another data error. Both of your screen shots have data errors. When you run data master does it say data error all of the time? If so, I would work on getting that fixed first. Give Danny Cheatham a call and see if he can make some time to help you out. He is one of the smarter guys up there than can help you out.

The truck does seem to appear that it wants more fuel, a lot more. Check your fuel pressure, your terms are lean.
 

WyoSyclone

Active member
Re: need some help in denver

Check under setup in DM and make sure you have the MAP set for stock, not 3bar. Yes, you need all of the check valves, and they need to be inserted at the right location. If your truck still has the vacuum line sticker on (front cowl) double check all of that
 

berzerker

wookie
Re: need some help in denver

i can help you out today or tomarrow , what side of denver do you live in ? i'll be at my work / shop later this afternoon in the i-70 & havanah street area .
 

warsaw

Sy#1012
Re: need some help in denver

ok put the check valves back in.and yes it does say error alot and the only reason i posted them pics is cause of the high knock and boost spike only last for one sec and its gone just dont think thats a good thing so i wanted to ask.and it is set on the 2bar not the 3bar.im gonig to do a vacuum test i think thats my problem
 

warsaw

Sy#1012
Re: need some help in denver

hooked my truck back up and i get alot of data error seems like every time i hit the gas am i not doin some thing right
 

TYTILIDIE

METH HEAD
Re: need some help in denver

If it does that only on a "data error", I would think you are ok. A data error usually is a "glitch" in the recording.
 

warsaw

Sy#1012
Re: need some help in denver

justput a 3bar in my truck and it feelss like i aint got no power and i had it data master and knock is crazy whats going on ?
 

TYTILIDIE

METH HEAD
Re: need some help in denver

justput a 3bar in my truck and it feelss like i aint got no power and i had it data master and knock is crazy whats going on ?

:rotf: I told you you cant do that. You need to sit back and listen to what people are telling you. I told you everything you need to know about this and you didn't listen. Put your 2 bar back in and save your money for tuning equipment and or to have some one tune your truck for you. If you keep doing things like this your truck will be doomed for a motor rebuild.

Also, you need to get your truck around people who know what it is they are looking at. Guidance is what you need. There are tons of people up there that can help you out. I wouldn't do anything else until you make sure you know what you're doing first.
 

warsaw

Sy#1012
Re: need some help in denver

ok thank i thought i need to put the 3bar in i ask for help from som one in denver and no one wants to help. i know you said you would but you live in colo springs and i cant drive down there guess im sol for now tnks
 

TYTILIDIE

METH HEAD
Re: need some help in denver

ok thank i thought i need to put the 3bar in i ask for help from som one in denver and no one wants to help. i know you said you would but you live in colo springs and i cant drive down there guess im sol for now tnks

Did you talk to Jeff or Cheatham?
 

cheatham2492

New member
Re: need some help in denver

God damn son... Ok Ok, I'm here maybe I can give you some information... bring it to me...
I think you have a couple of things wrong but I have to look at it to know.Sound like you need some honest advice.I just got back from Vancover.I'll pm you.
Dan Cheatham
 

TYTILIDIE

METH HEAD
Re: need some help in denver

Danny, last time I drove that truck it ran pretty good. You could hear pinging though even though it hadn't really shown on Data Master. There was 2*KR tops. May want to have him get a Walbro to be safe, I don't think the previous owner did that, 90% sure he had a stock pump in there.
 

warsaw

Sy#1012
Re: need some help in denver

ok new question. looking at getting a turbo was told to get a 20g 10cm looked into at it will run me 1600. i also looked at a turbo from rpm that will cost just as much.just need to know what i should do.
20g.jpg
[/IMG]
rpm.jpg
[/IMG]
 

gkrcr882

SyTyless......for now!
Re: need some help in denver

Did you ever get your truck running right to begin with? Properly tuned and running 100%, these things fly. In order to run a larger turbo and optimize it's efficiency, you should have other supporting modifications (Vortecs, DP, tune, etc).
 

TYTILIDIE

METH HEAD
Re: need some help in denver

you can get in to the mid to high 12's with the 20g up here. Not sure how you come with 1600 for a 20g though. Waller sells a nice upgraded 20g and I had great luck with it. I actually miss it. It is a great bolt on option, anything else you will spend lots of money to support.

I hope you got truck running well first, you are playing with fire if you didn't. What did Danny say about everything?
 

warsaw

Sy#1012
Re: need some help in denver

he said it was ok to go back to stock cause i took off the cross over tube.and i fixed the vac leak put a fpr on and a new throttle body on cause the old one had a leak. i also got my gp1 but need to know whats next
 

berzerker

wookie
Re: need some help in denver

DO NOT SPEND $ 1600.00 ON AN TURBO !!! You need to make sure all the basics are in order first before bolting on go fast parts . When danny and i have more time to mess with your truck and make sure everything is in good shape . Then we can start talking about adding parts . I dont know what your trucks running condition is but if you think it's slow ,, there's something really wrong with it.
 
Top