Need Some Help on This (pic included)

Junior1

NASTE Member
As some of you know, I have been lookin at a primo Ty for the past week. I had an inspection company shake it down. Only 3 things wrong with it. 2 I can live with, but the last one I need some info...

1. The power button on radio don't work
(No big deal I'll probably change it anyway)

2. Rear shock has a leak
album_pic.php

(Again nothing big, probably change em all)

3. Rear pinon seal has a leak
album_pic.php

Not sure on this. Looks like its been there a while. Is it common on these trucks ? Is it possible from normal wear/tear or is it from getting launched ? How much of a job to fix it ?

Thanks for the help
 

Syclone#1992

SyTy.net Moderator
Those look to be a fairly simple fix...pinion leak is kinda suspicious...how many miles? If it is low miles I wouldn't make to big of a deal out of it, but if it is high miles I would stay away...
 

MyTyphoon1993

Active member
What are your plans for when you do get a low milage truck, keep it under a blanket or drive itt around and put some miles on it, either way fix it and be done with it if you even get it.
 

Ian Turgeon

Cascading Inspiration
looks rough for 26,000 miles. Mine had the same seal on the rear go out. Only hard part about that job is finding a torque wrench.
 

sy112

New member
SyTyArchives said:
looks rough for 26,000 miles. Mine had the same seal on the rear go out. Only hard part about that job is finding a torque wrench.

yeah easy fix, mine leaks a little, just to lazy to get to it.
 

J_SULLIVAN

A&P slave monkey
The only time thats ever happened to me is either wear or from letting it (different autos) sit too long.
 

J_SULLIVAN

A&P slave monkey
BTW, that is exactly what has happend to my K-5 Blazer (from sitting) and its only going to be around $50 to fix. That fix IMO would be in the neighborhood for the TY :-? Have you driven it to see if you can hear a low pitch whining noise???
 

MyTyphoon1993

Active member
Syclone 697 said:
BTW, that is exactly what has happend to my K-5 Blazer (from sitting) and its only going to be around $50 to fix. That fix IMO would be in the neighborhood for the TY :-? Have you driven it to see if you can hear a low pitch whining noise???
Im thinking along the lines of stealership prices.
 

ericguy320

Stupid Member
pinion seal's leak on almost all GM truck at sometime or another miles dont matter. It is a easy fix, u joint bolts are 11mm the pinion nut is 1 1\4 i think, count how mant threads are showing on the pinion and scribe a line down the yolk, nut and pinion. Pull off the yolk with power steering puller or tap off evenly with a hammer. install new seal inspect yolk for any grooves or pitting on seal surface reinstall yolk and tighten nut till number of threads and all scribed lines line up.
If you take it to a shop they should only charge 1, 1.5 hours and the seal is about $10-20
 

Junior1

NASTE Member
Have you driven it to see if you can hear a low pitch whining noise???
I personally haven't. The inspection company has. They found nothing out of the ordinary.
In a parking lot or similar safe open area, at a slow speed turn a tight 'figure of eight'
Do you hear any unusual noises? N
Where there any other “odd” noises you heard whilst driving? N
Field op notes that overall the vehicle appears to be clean and solid


From the inspector:

I had a look over this report for you and here's what we've gathered. Overall I would rate this car as a "very clean appearing driver". IT IS NOT A 100 POINT PERFECT SHOW TRUCK! Typical of any vehicle driven on the road for nearly 30k miles signs of use can be noted. The novelty with this SUV - (besides the butt kicking performance factor) is the limited production numbers/years. You won't routinely see one of these running on the road with you! If the service history is inline and the cost of repairing the weeping pinion seal and radio repair is factored in then this has the makings of a great vehicle!

Think its time to negotiate, I'll keep yas posted.
 

mattw

Active member
This is like a $3 seal that takes ~15 minutes to change... Save yourself a head ache and a lot of money and do it yourself...

-Matt
 

Loeryder

New member
No kidding.
I paid $15 for my rear end pinion seal.

I'd think a reputable shop (read: NOT dealer) would put it in for around $100.
It's really only a little over an hour labor.
And I am sure someone in a shop that has all the right tools and lift at their disposal can do it faster.

I'd do it yourself and save the $$ for some mods.
 

Larry

New member
need some help on this (pic included)

need some help on this (pic included)

First grab the yoke and try to move it up and down and side to side to make sure the seal didn't fail due to a pinion bearing failure. If it's tight then man thats an easy fix, the seal only runs about 3 bucks. Sometimes they will just leak through the splines of the pinion and yoke. GM uses a little sealer on the splines to keep that from happening.
Just get a seal, pull the driveshaft, pull the pinion nut, tap on the yoke and it will come off. Remove the seal, install new seal, clean all the splines on the pinion and yoke and clean the seal surface on the yoke. Apply sealant to the splines on the yoke and pinion, don't use RTV, I use Form a Gasket #2 non hardening sealer in black. Be sure to work the sealant into the splines real good. Reinstall the yoke, washer and nut. It is hard to get the right preload on the pinion bearing with the rearend being completely assembled, usually requires an inch pound wrench, too long of a process to explain here. Just get the nut tight, helps to scribe a mark on the nut before you remove it and then tighten to the same spot and then 1/8 inch further to give it some preload. Reintall driveshaft and you done.
Only takes about a half hour to do it and $3.00 seal and some sealant.
Easy fix, would not worry about it. Later, Larry.
 
Top