Re: nitrous kit
you mentioned how unevenly the intake distributes air. I have a GN with an RJC Power Plate on it to force more air to the front cylinders. Is there some device used to help envenly distribute the air for the Sy's and Ty's? On the GN's the back cylinders get the most air, making them lean. what cylinders get the most air on the Sy's and Ty's? By looking at the intake it would seem they should be pretty even.
I have a couple of ideas that might be able to be executed with the stock manifold. Would require some machining and then welding to finish it off. It would give even distribution to the front 3 and back 3, although the firing order also comes into play if you are going to be really picky.
I made a rough model of the upper manifold in Solid Works and was planning to do a simulation to see where the air was going. Unfortunately, I don't have the whole sim package so I didn't follow through.
As far as air distribution, DaveP had a post the other day on why he believed the middle cylinders (3 and 4) usually suffer damaged ring lands, blown head gaskets, etc. before the other cylinders. I couldn't find that post in a quick search because he posts so much, but it was interesting. The jist, in his opinion, was that it was more of a problem with the water jacket around 3 and 4 not adequately cooling compared to 1, 2, 5 and 6.
On the topic of using a Wet N2O kit, the upper isn't designed to flow liquid. The combination of nitrous and fuel can cause problems, particularly with uneven flow distribution. In my opinion, go with a dry nitrous kit unless you are going direct port. Then you are injecting right next to the fuel injector bung and can take advantage of the tunability of a wet kit.