SY-1193
Active member
Who is going? I will be there Saturday the 16th in the Typhoon.
https://www.specialeventpro.com/cruisin-ocean-city
https://www.specialeventpro.com/cruisin-ocean-city
My friend goes with his lightning and I was thinking about going with him this year.
Nick, If have not been before I think you will be blown away at all you will see.
I usually start at the convention center inside and work my way thru the parking lot show there and then head directly to the inlet show. All the locations are in that link I posted. $15 ticket gets you in the Convention Center and the Inlet Show both. (Was $10 it just went up). There is plenty to see if you don't do the shows.
The evening I go to the Ice Cream Palace (Near Hooters 123rd St.) there is a show there also in the parking lot. I usually plant myself there and watch the cars cruising by on the street for the remainder of the night. We usually all meet up there. Parking is a pain in the ass but worth the wait. I just try to have patience with the parking situation.
Hope the weather is nice!
Take a look around yourself for cops before doing a burnout in the water boxes the residents have set up in the streets. Remember cops are on bikes, horses and motorcycles too!
I saw the syclone with the flats. I thought it had 2 front flats with bent wheels and both front fender flares were thrown in the bed. I'm not sure how that happened. I have a couple pictures of it but they are not that clear since it was at night.
I'm that lucky guy but thankfully best case scenario worked out. Ate a curb instead of making a vehicle sammich. Soooooo expensive tow bill later and the disgust of being in OC for only 10 minutes when this happened... I need as follows for starters
Two SyTy wheels
4 tires (may as well add a 4th)
Both front fender arches
Pass side Syclone rocker panel
Front bumper cover
Driver side foglight mount (may be able to rehab)
Passenger side U/L ball joints (took initial impact)
Parts I'll probably need till I drive it after acquiring said parts will be with control arms and steering components.
So! I'll upload some pictures of the cladding and wheels in case anybody would be interested in acquiring them to rehab them or use them for filler pieces or repairing other panels.