bender
Member
I finished up installing my plx sm-afr tonight. I thought I had my stock chip patched for wide band when I had it reprogrammed. It is the upgraded stock program from hood tuned performance, I mostly did it for the egr but what I read was it was also for wide band among other things.
Anyhow, I replaced my stock o2 sensor with the wide band, then I installed the controller, but left out the nb wire. Followed the thread exactly then started the truck. I watched on datamaster as my temp rose and watched the afr's. The truck idled perfect, but stayed in open loop the entire time. Even after temps were above 140-150 it stayed open loop. So I shut it down and hooked the nb in to the ecm, and then restarted, it went closed loop as expected.
I have to have the nb hooked up to go closed loop. Does this mean that my stock chip is not patched for wide band. If so, it is not a big deal as my code 59 stuff is on the way, but was just wondering.
Anyhow, I replaced my stock o2 sensor with the wide band, then I installed the controller, but left out the nb wire. Followed the thread exactly then started the truck. I watched on datamaster as my temp rose and watched the afr's. The truck idled perfect, but stayed in open loop the entire time. Even after temps were above 140-150 it stayed open loop. So I shut it down and hooked the nb in to the ecm, and then restarted, it went closed loop as expected.
I have to have the nb hooked up to go closed loop. Does this mean that my stock chip is not patched for wide band. If so, it is not a big deal as my code 59 stuff is on the way, but was just wondering.