Plug wires?

[syclomatic]

I went and ordered the cr42ts plugs and they come in today, but what kind or wires should I get. Sytyarchives said that accel extreme 9000, which are kinda pricy will work, but what are some opinions on a stock setup? Also, any opinions on a type of cap/rotor?

 

[typhoon92]

Re: Plug wires?

Look here
http://home.swbell.net/loeryder/parts.html

 

[Loeryder]

Re: Plug wires?

Taylor Spiro Pro are the same wires Kenne Bell used to sell as Red Hots and you can get them from Michael Hood at Tucker Auto parts.

On the Cap and rotor just get a heavy duty brass tipped, Napa Gold or similar.

 

[turbodig]

Re: Plug wires?

I went and ordered the cr42ts plugs and they come in today, but what kind or wires should I get. Sytyarchives said that accel extreme 9000, which are kinda pricy will work, but what are some opinions on a stock setup? Also, any opinions on a type of cap/rotor?

I've taken more sets of Accel wires off Sys/Tys than I can count. Avoid the Extreme 9000s like the plague.

I run Auto-lite Pro cheapie sets on mine, and they work great to 22-24 psi.
Have run them on many other trucks successfully, also. Only downer is that they're usually a bit long for the application.

If you simply must pay more for wires... try the MSD wires.

Brass contact cap/rotor. Brand isn't really specific.

 

[jjorgensen52]

Re: Plug wires?

I run accel 8.8mm's right now, in lieu of a set of custom made Magnecor 10mm silicone's that I have for the LS1 coil setup... one of these days I'll reinstall it

 

[syclomatic]

Re: Plug wires?

I've taken more sets of Accel wires off Sys/Tys than I can count. Avoid the Extreme 9000s like the plague.

I run Auto-lite Pro cheapie sets on mine, and they work great to 22-24 psi.
Have run them on many other trucks successfully, also. Only downer is that they're usually a bit long for the application.

If you simply must pay more for wires... try the MSD wires.

Brass contact cap/rotor. Brand isn't really specific.

Honestly, I rather go for the cheapies that work just as good or better as the pricey ones. Save a little cash. I'll tell you how they work after the install.

 

[alwayscode390]

Re: Plug wires?

I have some of the Taylor Spiro Pro's that are new in the box I was about to throw on Ebay, pm me if you are interested in buying them , thanks ---

Part #74232 8mm , red

 

[syclomatic]

Re: Plug wires?

I have some of the Taylor Spiro Pro's that are new in the box I was about to throw on Ebay, pm me if you are interested in buying them , thanks ---

Part #74232 8mm , red

Recived pm, and pm returned!

 

[autoaddictions]

Re: Plug wires?

Mike Lee makes a custom set that fits perfect with the boots angled for the sytys. Call Race Proven motors in Cali.

 

[SeattleSy#1255]

Re: Plug wires?

Taylors all the way...fit great work great. hands down IMO and experience. MSD are nice, but 4 times the prices.

How about those Holly wires from the 02's nats. anyone remeber. :lol: