promgrammer

E-Rue

New member
id like to be able to click on a table column, and click the up or down button and it make all the values in every box in the column go up or down. i hate trying to click each and every box to change the value. the way it is now, its a PITA when your doing big changes, but works good for fine tuning. just an idea.

also, where do i get the new version that has boost control scaled by MPH?

e
 
B

Blake

Guest
The latest version recognizes the scaling but only if the code changes have already been done IIRC.
Promgrammer is available for downloading, at least the one that recognizes the scaling, at several places. It seems Bill Calcagano(forgive me if I spelled that wrong) made one last new version that was revamped and so much work went into it that previous registrations for updates were no good because it wasn't really an update. It was completely new. I'm pretty sure I don't have that one.
He could definitely answer your questions better.
George
 

BillC

New member
Re: promgrammer

E-RUE said:
id like to be able to click on a table column, and click the up or down button and it make all the values in every box in the column go up or down. i hate trying to click each and every box to change the value. the way it is now, its a PITA when your doing big changes, but works good for fine tuning. just an idea.
That change is on the list of things to do, along with a half-dozen other improvements. Unfortunately, I don't have time to do any of it, and won't for the foreseeable future. If anyone wants to help me rebuild and re-install the engine in my Ty, or do any of the other higher-priority things I have to do first, then I'd be able to get to it sooner. Otherwise, don't hold your breath....

E-RUE said:
also, where do i get the new version that has boost control scaled by MPH?
That's been in Promgrammer for a while. It's controlled by the F71_SCALE parameter (as described in the instructions -- RTFM!). If you register, I'll send you the latest version.

BTW, the version on Jas' web site is v1.0. Updates from that version (and there have been a few) are only available to registered users. This was done to help "inspire" some of the deadbeats out there to register (including you, Mr. E-RUE :p ). As new versions are developed, I send them directly to all registered users.

Blake said:
The latest version recognizes the scaling but only if the code changes have already been done IIRC.
That's only for the 2-bar vs 3-bar MAP scaling. For boost control, Promgrammer actually inserts the code mod used to scale boost by the desired factor (TPS or one of two different speed scales) as needed.

Blake said:
It seems Bill ... made one last new version that was revamped and so much work went into it that previous registrations for updates were no good because it wasn't really an update. It was completely new.
Any registrations for Promgrammer98 or Promgrammer01 are still valid, but only for those versions. However, they are not being supported any more, except for answering usage questions.

Promgrammer v1.0 was a significant upgrade/revision from P01. Despite relatively few cosmetic changes, most of the underlying code was complete rewritten. As such, I decided to ask for new registrations. If people don't want to upgrade, that's fine, keep using the old version(s) as long as you like. However, new features/functions will be going into Promgrammer only, and only registered users will get copies.
 

E-Rue

New member
ok i found this after searching jas's site. i never read it, just DL'd the program and started. been busy learning the tables and what they do i guess. anyway, how would you like your $10?

and i would love to help you with your truck, but thats quite a drive from my house.

e

*updates to version 1.0 are only available to registered users.
Right Click and "Save Target As" if it gives you trouble
You are Downloading a Zip file that contains that actual Prom.jar java executable file.
Please extract the jar file and have java support installed on your machine before attempting to run.



Features:
Full Java2 SDK1.3 support.
Load multiple binaries and switch between them.
Copy and paste (and undo) parameters between loaded binaries.
Generate an exportable comparison between loaded binaries.
Sort by column by double-clicking on the column header.
Switch between available display styles: Metal (Java standard), CDE or Windows.
Stored as an executable file, so can be run by just double-clicking on it.

Licensing:
This program is shareware. If you try it and don't like it, please delete all copies from your computer(s). If you like it and continue to use it, please register it. The registration fees are $10 for non-commercial use (defined as: you don't sell, or otherwise make money from, any chips you make using it) and $50 for commercial use. Your registration fees will be used to support and upgrade this program, so please help your SyTy community by registering.

Installation:
To run Promgrammer, you'll have to install the Java Runtime Environment (JRE) v1.3.1. The JRE can be downloaded from:
Windows version
Linux version or
Solaris version
After the download is complete, run the installation program. For best results, you should remove any old JREs or JDKs first before installing the new Java.
Download Promgrammer and store it in a convenient location. Run the program by simply double-clicking on its icon (like running any other application). For convenience, you may want to make a shortcut to Promgrammer and place the shortcut on your desktop.
Promgrammer will run on any platform supported by JRE 1.3.1. It has been successfully tested on Windows 95, 98, NT v4 and XP, running on Pentium, P2, P3 and P4 processors.

Running Promgrammer
Specific instructions are available by choosing "Instructions" under the "Help" menu


For registration information, or for questions, comments or bug reports, please email calcagno@erols.com

Thanks and Good Luck,
Bill Calcagno
 

BillC

New member
E-RUE said:
anyway, how would you like your $10?
Cash, check, money order or paypal are acceptable. If paying by cash, check or money order, email me and I'll send my address. If using paypal, please add 3.1% to cover their !$&#* fees and use my email address (listed in my profile, and should also be at the bottom of this post).

E-RUE said:
and i would love to help you with your truck, but thats quite a drive from my house.
Thanks for the offer. If you're ever in the area, come on by. However, I was really just griping about having too much to do and not enough time. This working-for-a-living BS really gets in the way of all the stuff I want to do.... :roll:
 

InvisiBill

Active member
BillC said:
If using paypal, please add 3.1% to cover their !$&#* fees...

FYI, this is against their ToS. I don't think they'll hunt you down for it, but just be warned that they could...
 

Mick

New member
You may want to lake a look at a more advanced software package. GMPCM has a very nice interface that most find quite easy to use.
It supports nearly any OBDI application "including the $58". The downloadable software package comes with a demo definition file of the 3.1 L V6 called $A1.pcm, but the 58.pcm file (used for the SY/TY) is available in the downloads section of the GMPCM website:

GMPCM Website

I've also included a selection of "stock" $58 binary files in the downloads section, and hope that many will find them useful. Just "Import" any one of these available $58 binaries into the "58.pcm" file to view its data.

The "Table Modify" feature located in the "Tools" menu allows you to modify an entire row, or colum of data selected in a table by a desired amount. It can do the same for the entire table if desired.
Any table cell can be easily modified by simply typing in a new value, or by right clicking the cell and selecting from the list that pops up. The Increase or Decrease list selection will change the value by one, while the "Zoom" feature presents a standard scroll pane (also used for "Constant" value manipulation) for the selected cell.

A fairly complete "Help" system is included within the software, but I am always available if you have any problems or question about the software.
I also welcome anyones input, request for future enhancemants, etc..

Mick
 

BillC

New member
Mick said:
You may want to lake a look at a more advanced software package.
More advanced, hmm? Does it automatically recalibrate the display for a 1-bar, 2-bar or 3-bar chip? Will it allow the user to change the scaling source for boost control, and then automatically recalibrate for the change? Does it automatically recalculate dependent parameters? Will it run on any operating system, not just windoze?

Promgrammer may not have all the "Gee, it's so pretty" appearance stuff as your program, but then, it was never intended to. It's meant to be a serious SyTy-specific editing tool, and I think it delivers the most important functionality. New features and the look-at-all-the-pretty-colors stuff will come with time, as the program continues to evolve. So, despite the lack of "Ooh, pretty" fluff, Promgrammer offers features and functionality not available anywhere else.
 

Mick

New member
If by fluff you mean powerful features and ease of use, then I guess you could say that. :)

Here are just a few examples :

Multiple file capability, open a "stock" version along with several versions of your modified code, etc.

Powerful comparison capabilities that allow direct visual display of differences found. Every wanted to know what they did to that expensive aftermarket chip to increase performance? Now you can find out with just a few mouse clicks.. Then drag and drop the changes they made directly to your own data.

Search features that make it easy to locate an area of interest within the 513 different items of the $58 PCM definition.
Note: The $58 binary is relatively small as it is only 16KB. 32KB binaries typically have close to 1000 data areas defined, while OBDII binaries can have several times that amount.

Full drag and drop functionality built in.

Based on the most popular and familiar interface in the world, the Windows GUI, so it does not require taking an entire instruction course just to use it.

A Notes entry for each item, each one capable of containing 1.2 gigs of text, typically used for documenting changes or even adding several rich text documents worth of extended information.

Graphical display of data in completely customizable 3D surface plots.

Import and Export of table data in Excel spreadsheet format to take advantage of the many third party optimizers available.

Binary file layering to easily create a "switch able" chip.

Built in raw hex editor

The ability to create a definition completely from scratch, with real time display of the binary data to make locating tables and other areas an easy task.

Direct import of Winbin format definition files, so there is wide range of applications already addressed in addition to highly accurate and complete PCM definition files that are currently available. (Most folks own more than one vehicle)

OBDII capable - the only software currently available that can even open and define a 512kb GM OBDII binary file.

The built in live update utility means you will always have the latest version, and we are constantly adding enhacments and new features.

Registration is easy, with a wide variety of payment options available
We dont whine about which option you choose, even if it costs a bit for the transaction fees involved..

Mick
 

dgoodhue

BuSTeD 4.3
-Multiple file capability, open a "stock" version along with several versions of your modified code, etc.

It could be helpful, but I rarely work on more than one file at a time. It keep the confusion down. I can do it in Tuner Cat, but I don't use it.

-Powerful comparison capabilities that allow direct visual display of differences found. Every wanted to know what they did to that expensive aftermarket chip to increase performance? Now you can find out with just a few mouse clicks.. Then drag and drop the changes they made directly to your own data.

don't care.

-Search features that make it easy to locate an area of interest within the 513 different items of the $58 PCM definition.
Note: The $58 binary is relatively small as it is only 16KB. 32KB binaries typically have close to 1000 data areas defined, while OBDII binaries can have several times that amount.

don't care.

-Full drag and drop functionality built in.

How many thing to do you drag and drop? Maybe copying timing table between different boost programs.

-Based on the most popular and familiar interface in the world, the Windows GUI, so it does not require taking an entire instruction course just to use it.

It isn't that hard. My PROM burner & Diacom isn't Window base either. Burning a PROM isn't exactly an easy craft, if you can't figuire this out you should be burning your own PROM's.

-A Notes entry for each item, each one capable of containing 1.2 gigs of text, typically used for documenting changes or even adding several rich text documents worth of extended information.

I could see where this could be helpful, since I make a seperate log file for tracking changes.

-Graphical display of data in completely customizable 3D surface plots.

BFD, when tuning any engine you should give an engine what it want not what you think it need or looks like it need from a graph.

-Import and Export of table data in Excel spreadsheet format to take advantage of the many third party optimizers available.

I haven't used any of these but I supose that could be useful.

-Binary file layering to easily create a "switch able" chip.
-Built in raw hex editor

My PROM burner program does these already.

-The ability to create a definition completely from scratch, with real time display of the binary data to make locating tables and other areas an easy task.

You going to need these feature to create a 3 bar defintion file, why reinvent the wheel...

-Direct import of Winbin format definition files, so there is wide range of applications already addressed in addition to highly accurate and complete PCM definition files that are currently available. (Most folks own more than one vehicle)

I have tunercat also, it doesn bother me both my car use different progams, it not like the PROM files are interchangable.

-OBDII capable - the only software currently available that can even open and define a 512kb GM OBDII binary file.

Who cares, my sy & ty aren't ODBII

-The built in live update utility means you will always have the latest version, and we are constantly adding enhacments and new features.

-Registration is easy, with a wide variety of payment options available
We dont whine about which option you choose, even if it costs a bit for the transaction fees involved..

I don't know what costs GMPCM but this is only $10. Tunercat s $70 plus a $20 defintion file. The 3 bar stuff is alone worth $10 even if I already a $58 defintion file for Tunercat/
 

E-Rue

New member
its only $15 id buy it.

hey i have another idea for future updates of both softwares.

built in conversion, so you can read things at degC or degF or both.
boost and vacume?

things like that...... just an idea.

e
 

Sy#26

New member
First table I looked at after d'loading GMPCM was Main Spark Advance - table begins at 800rpms (what happened to 600?), increments by 200rpms up to 3400 & stops there. HUH?? Promgrammer starts @ 600rpms, increments by 200 until 1400, then by 400 right up to 4800.

Not R-E-A-L confident in it based just on that first brief look-see.
 

BillC

New member
Mick said:
Here are just a few examples :

Multiple file capability, open a "stock" version along with several versions of your modified code, etc.
Got it. In fact, that's been in Promgrammer for over five years, now.

Mick said:
Powerful comparison capabilities that allow direct visual display of differences found. Every wanted to know what they did to that expensive aftermarket chip to increase performance? Now you can find out with just a few mouse clicks.
Got that, too. Promgrammer compares all loaded bins and sends the results to a user-specified file. If you want it "visual", open the file in your preferred text editor -- no need to re-invent the wheel.

Mick said:
Search features that make it easy to locate an area of interest within the 513 different items of the $58 PCM definition.
Don't have search, but the main display is sortable by any column. Just double-click on the preferred table heading, and all values will be resorted. Makes it easy to find parameters by values or units, instead of just location or name.

Mick said:
Note: The $58 binary is relatively small as it is only 16KB. 32KB binaries typically have close to 1000 data areas defined, while OBDII binaries can have several times that amount.
Don't care. Promgrammer is 1227749-specific, as I stated earlier.

Mick said:
Full drag and drop functionality built in.
Have full copy-and-paste instead, including copying/pasting multiple parameters at a time. Depending on how you work, this is arguably more useful.

Mick said:
Based on the most popular and familiar interface in the world, the Windows GUI, so it does not require taking an entire instruction course just to use it.
You've been listening to Bill Gates a little too much if you actually believe everybody prefers to use windoze. But, Promgrammer works just fine in that operating system too, in all its various flavors.

Mick said:
A Notes entry for each item, each one capable of containing 1.2 gigs of text, typically used for documenting changes or even adding several rich text documents worth of extended information.
Used to have that. Based on user feedback, decided it wasn't really useful or needed. Changed it to have a notes section per bin. Size is limited only by the user's computer (RAM and hard disk size). BTW, if people would prefer to have both bin and parameter notes, it's easy to add back in (just let me know if that's what you want).

Mick said:
Graphical display of data in completely customizable 3D surface plots.
Only if you have Excel installed. If your users didn't get Excel free (like a bootleg or pre-installed on their computer), a lot of them may not be willing to spend the extra $$$ to activate this "feature".

Mick said:
Import and Export of table data in Excel spreadsheet format to take advantage of the many third party optimizers available.
Promgrammer can export in both text and CSV (a standard spreadsheet format) formats, both entire bins and user-selected parameters. Didn't see a need to import from a spreadsheet, since no ECM runs Excel files. :p

Mick said:
Built in raw hex editor
Promgrammer has a hex exporter. Once again, didn't see a need to reinvent the wheel and write a hex editor, since A) most prom burners include this capability, and B) there are a lot of really nice third-party hex editors out there if you don't like the one that came with your burner.

Mick said:
The ability to create a definition completely from scratch, with real time display of the binary data to make locating tables and other areas an easy task.

Direct import of Winbin format definition files, so there is wide range of applications already addressed in addition to highly accurate and complete PCM definition files that are currently available. (Most folks own more than one vehicle)
Don't need definition files and don't want 'em. As I've stated before, Promgrammer is 1227749 specific.

Of course, one point you left out is that using definition files makes it extraordinarily difficult to do the dynamic recalibration and recalculation that Promgrammer does. In fact, as far as I know, Promgrammer is the only editor available that automatically recalculates dependent parameters, performs code changes (the boost scaling) and automatically handles calibrations for all available MAP sensors. And all without forcing my users to edit, or even use, an external definition file. :)

You should also point out that making a definition file, especially from scratch, is not easy. It is tedious, mistake-prone, trial-and-error work. And if you can't make your own file, you have to hope the guy who created the definition you're using actually knew what they were doing.

Fortunately, Promgrammer doesn't rely on any hacker-wanna-be guessing and hoping. It was developed using a genuine GM P4 parameter listing. No guessing, hoping or trial-and-error involved. So, unless you scam a copy of Promgrammer and use it to update your $58 definition file, that file won't ever be as good.

Mick said:
OBDII capable - the only software currently available that can even open and define a 512kb GM OBDII binary file.
Once again, don't care -- see above for explanation.

Mick said:
The built in live update utility means you will always have the latest version, and we are constantly adding enhacments and new features.
How "live" do updates need to be? All registered Promgrammer users get all updates sent to them as soon as they are available. No waiting, no fuss, no requesting or checking, and no behind-the-scenes "Big Brother" nonsense.

Mick said:
Registration is easy, with a wide variety of payment options available We dont whine about which option you choose, even if it costs a bit for the transaction fees involved..
Registration for Promgrammer also easy -- just send money. :D But, since I'm not doing this commercially, I can't take credit cards directly -- that's why I take paypal. Besides, if you don't care about transaction fees, why do you charge more for your program?
 

InvisiBill

Active member
Mick said:
Well, enough debating which is better, a debate like that could go on forever and I don't have time that. I certainly do not want to step on anyones toes here.
Our Sy/Ty support was in its preliminary stages, so we simply removed GMPCM support for the sy/ty It may be restored at a later time, but I highly doubt it, as few here seemed interested in a different approach or option to what already exists.

I agree that this could go on forever, and that features one person likes may be a waste of bits to another.

I don't agree with removing support for it though. It's not my program or time though... I'm generally of the belief that more options is always better. If nothing else, it'll foster some competition between the two of you until we have an editor that'll tune your truck for you, while getting you a beer.

While yours seems to be a more portable choice, understand that Promgrammer is written by a SyTy enthusiast, specifically for SyTy's, based on what he and other SyTy programmers want. In some cases (a large number here on this board) a very focused SyTy editor will be preferred, and in others a more general approach may be desired.

It's not up to me to decide if it's a waste of time, but I wouldn't call the whole thing off just because some people like something else. Make yours better so that people want to use it. Find out what users really want instead of just adding "advanced features using all the latest technology!!!!1". Especially if it's still in the preliminary stages, you've got plenty of room to improve things. I'm guessing that people didn't like Promgrammer as much when the very first version was released either. But Bill's been updating it with a lot of the specifics that people here want, so it's full of things that people want and use on a regular basis.
 

Loeryder

New member
Yeah I thought this debate would spark some new features for both software packages that SyTy enthusiasts want.

Like Invisibill said, everyone uses different tools to get the same job done, so why give up so easy?

Not trying to put anyone down here, but friendly competition is what drives inginuity.

Obviously BillC has put TONS of time into reprogramming PromGrammer to make it exactly what the SyTy Community wanted.
With input from users he added options and functionality that would have never been tried. Some of the features are definitely not the norm when talking bin editors.

Not too mention he has a SyTy so it is in his best interest to support his own.
 
Top