Q regarding Ultimate.

Methuselah

New member
Any chance the schematics and code for the Ultimate might become freely available?

People who chose not to DIY will likely keep the income flowing.
________
BDSM ANAL
 
Last edited:

Methuselah

New member
That's kinda what I was trying to do. Prompt the responsible parties into publishing online those materials necessary for an electronics hobbyist to hobble together an Ultimate.

Otherwise Ive got to figure it out myself, which means I'll probably just stick with reprogramming a single prom...which isnt as cool.
________
ANAL HARDCORE
 
Last edited:

Zac

New member
Methuselah said:
That's kinda what I was trying to do. Prompt the responsible parties into publishing online those materials necessary for an electronics hobbyist to hobble together an Ultimate.

Otherwise Ive got to figure it out myself, which means I'll probably just stick with reprogramming a single prom...which isnt as cool.

Why would BG just give this info out? Doesn't that kind of defeat the purpose of him selling the chips?
 

Methuselah

New member
But doesnt not giving it out kind of defeat the purpose of community?

I think if a choice of Ultimates was available, one fully assembled, one in kit form, and the other just schematics with the prom code on floppy, then most people would still prefer the first. I would lean towards the second as would a number of other do-it-yourselfers.

Who developed the Ultimate and layed out the PCB anyhow?
________
Upskirt street
 
Last edited:

cr133r

New member
If all you want to do is have multiple 'programs' available... All you need to do is get an EPROM that is bigger by 2x,4x,16x....

Use the high addressing pins to select the program you are running. So in actuality, you have 16 different EPROMS in there that you can select between at any time.

Now, if you want to go a LOT further, you could probably do a microcontroller that emulates an eprom and lets you change things dynamically, that would be the easiest way to tune. Plus, you'd only need to store different tables instead of the entire eprom for different 'programs'.

Billy
 

Methuselah

New member
Understand that Im not asking how it is done, a lot of people could tell me "how to make an ultimate".

Im asking for OpenUltimate. Where the same product that so many know and love can be available in kit and schematic/code form. As well as the 100+ page document on the "hacking" of GMs prom code that Ive heard rumor about.

Ive heard that someone has an eprom emulator they use for real time tuning like cr133r suggested. Of course, this one requires a PC.

"And remember, this is for posterity, so...be honest"
- the 6 fingered man
________
AVANDIA DEATH
 
Last edited:

dgoodhue

BuSTeD 4.3
Methuselah said:
Im asking for OpenUltimate. Where the same product that so many know and love can be available in kit and schematic/code form. As well as the 100+ page document on the "hacking" of GMs prom code that Ive heard rumor about.

As for the 100 page document, are you talking about the 'Functional Feature of the 1988 P-4 Turbo PFI System' aka same ECM used in the SyTy? Look around in the DYI GM ECM website, there is a lot of info there, I bet you could find out how to convert from 2 to 3 bar. The Code is BG, I wouldn't give it out. He spend hours upon hours learning how to tune these trucks. You can burn a PROM too, pick up a PROM burner, EPROM, Tunercat software and adapter so yo upop chips in and out of your memcal. I think I spent a little over $120 on these parts (I do use my works, PROM burner though)

The ultimate interface and board nothing special, someone may give it to you, but you can learn to do it your self (it may take awhile) Pick up a book about Digital logic and you could make the whole interface.
 

Methuselah

New member
I knew I shouldnt have bothered to ask. Im going to head back to China where my thinking is appreciated :)

Yet another person has misconstrued my question from "is the Ultimate going to be opened up to us" into "I dont know anything about electronics, please teach me." I dont what to know how much you guys know, I want the knowledge to be formalized into a document freely available to anyone who wants it.

Thanks for the tip on the document though.
________
Ford-Vairogs History
 
Last edited:

CLONE

New member
Methuselah said:
Yet another person has misconstrued my question from "is the Ultimate going to be opened up to us" into "I dont know anything about electronics, please teach me." I dont what to know how much you guys know, I want the knowledge to be formalized into a document freely available to anyone who wants it.
Thanks for the tip on the document though.

Why not ask Brian Green personally then? briang@syty.net will get you in contact with him. None of the rest of us are in any position to help you, unless Todd A. is on the UBB.
 

smeagol

Active member
Todd developed and does the electronics side of things. He'd have to make the call there, my guess is that he wouldn't want to give the schematics away, but I'm not sure. You can find the simple schematics for eprom switching yourself if you look hard enough.

I worked up the 3 bar programs, most of the calibration. I am the one doing the custom work as well. I am definitely not going to put a webpage out with the programs free for downloading. I might give out some programs to a person that I believe I can trust, who is in need of some calibrations for their own truck.
 

Methuselah

New member
This sounds promising. You dont necessarily need to divulge your well-tuned programs, but rather provide a reference implementation of a three bar with the differences pointed out.
________
Youporn
 
Last edited:

smeagol

Active member
Man I wish someone could have done that for me a few years back.

I don't know ... my thoughts are split on this matter.
 

ghettosled

SYTY SUPERSTORE
people complain about a lack of syty vendor support, and this is exactly why.

why would someone who has spent countless hours perfecting a product simply want to give it away for free. The tuning info is there. The chip building info is out there. But if I were BG, or Todd I sure as hell wouldnt want to provide a free DIY kit on how to contruct an ultimate chip. Make it easy on yourself. Buy a speedpro.
 

Methuselah

New member
I just think that the motivations for innovation in a "community" should be for posterity. Im not ruling out making a buck off of the time and energy spent in development and manufacturing...but the profit margin should reflect goodwill towards the community.

I'll shut up about this, but at least I got Brian thinking. Perhaps he will be interested in collaborating with me in the future on the successor of the multi-mode prom, OpenFAST :)
________
TOYS EROTIC
 
Last edited:

dgoodhue

BuSTeD 4.3
Methuselah said:
This sounds promising. You dont necessarily need to divulge your well-tuned programs, but rather provide a reference implementation of a three bar with the differences pointed out.

If you want to get started in chip programing, you will need to do a lot of research on your own. I would try searching the DYI-ECM, the tuning section of this board and F-body 3rd gen board. You will need to have a good understanding of how your engine works and how the ECM works in general. I would start off with the base 2 bar system and tune that to get started. You want to take baby steps, try fooling around with some of the parameters in PROM. At least with non-turbo motors, most of the tuning is done at part throttle, you this do first and then you do the WOT tuning.

After you perfect that, you might be able to find the information for a 3 bar converison or someone here might be nice enough to give it to you. Then you can tune your truck with higher boost. Then you can make mutilpe files for different boost levels and then look into making a switch which changes between the programs.

On the bright side is that you will know your truck inside and out, and you can make a program that is better than the Ultimate which is tuned for a broad range of trucks. The bad new is your just looking for a cheap way out in making an ultimate chip, your better off working a 2nd job at minimum wage, it will be cheaper.

BTW BG do you have your own defintion files for 3 bar bins or do you just just modify the tables (load vs VE if I remember right, I am just a beginner with a MAF system) to work with the different readings.
 
Top