dBaseD
New member
I took my Sy out to moroso tonight for the first time since I got it and decided to make and datalog a few runs.
Best I ran was a 13.58@96 with a 1.90 60ft. Reason being that it seems like the truck literally lays down up top. As soon as I got over 4k RPM's the truck seemed to start a surging pattern. I took a look at the datalogs and - sure enough, it appears to do just that.
If someone can take a look at my bin and datalog and see if they see a reason why the truck is behaving like that I would apreciate it. The particular spot starts around sample 1365 and you can see where it seems just just bounce off 4500rpm and rev no higher. I hunted through all the tables and scalars in code59, I just didnt see anything resembling a limiter (that wasnt maked "NOT USED")
I apologize if this is a newbish post - I am new to tuning GM's in general though I tuned my Turbo 5.0 Mustang with both a Tweecer and a Megasquirt.
http://www.doomsday.org/Syclone/jason_syclone.bin
http://www.doomsday.org/Syclone/moroso3.csv
The truck has a PTE44 turbo, 50# injectors, KB A2A IC, and Old school KB300hsl converter, AEM wideband, an ostrich chip running code59, and a few other minor mods. No reason it shouldnt be going at least 105 in the 1/4 IMO.
Thanks
Jason
Best I ran was a 13.58@96 with a 1.90 60ft. Reason being that it seems like the truck literally lays down up top. As soon as I got over 4k RPM's the truck seemed to start a surging pattern. I took a look at the datalogs and - sure enough, it appears to do just that.
If someone can take a look at my bin and datalog and see if they see a reason why the truck is behaving like that I would apreciate it. The particular spot starts around sample 1365 and you can see where it seems just just bounce off 4500rpm and rev no higher. I hunted through all the tables and scalars in code59, I just didnt see anything resembling a limiter (that wasnt maked "NOT USED")
I apologize if this is a newbish post - I am new to tuning GM's in general though I tuned my Turbo 5.0 Mustang with both a Tweecer and a Megasquirt.
http://www.doomsday.org/Syclone/jason_syclone.bin
http://www.doomsday.org/Syclone/moroso3.csv
The truck has a PTE44 turbo, 50# injectors, KB A2A IC, and Old school KB300hsl converter, AEM wideband, an ostrich chip running code59, and a few other minor mods. No reason it shouldnt be going at least 105 in the 1/4 IMO.
Thanks
Jason