Robert Lone
MUTANT
Re: Sonoma GT 0334 - Build Pics
Why is there a rail under the truck? (dragster I mean...)
Why is there a rail under the truck? (dragster I mean...)
Sonoma GT 0334 - Build Pics
- Thread starter Syborg Twin Turbo
- Start date
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
my truck was on the lift so i didn't have to work on the ground and they were working on the dragster as they are racing next weekend. Dave's leaving on Thursday to see if he can break his record and become the fastest front engine dragster.
T-56 said:
my truck was on the lift so i didn't have to work on the ground and they were working on the dragster as they are racing next weekend. Dave's leaving on Thursday to see if he can break his record and become the fastest front engine dragster.
Robert Lone
MUTANT
Re: Sonoma GT 0334 - Build Pics
ooooooooo.... a slingshot!:tup:Syborg Twin Turbo said:
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
that was a good one - i am really thinking about buying one of those car trailer thingy's
Maybe Ken can lend me his
JS Manufacturing said:
that was a good one - i am really thinking about buying one of those car trailer thingy's
Maybe Ken can lend me his
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Happy Monday all,
Okay skipped last week here Dad bought a new project
and it's eating up what's left of my spare time and it's not even here yet.
more pictures here
http://www.sportmachines.com/gallery/57-Chevy
Should be a fun little Project
Okay back to my project which doesn't seem as cool anymore
Dave was able to bend up a test panel of the rear bumper
Started working on the Fuel System.
Located the FPR in the Intake Valley to keep it clean looking
Fuel Line coming out of the Tank
Into the Aeromotive 100 Micron Filer & A1000 Pump
The second filter is the 10 Micron Filter just to get out the really small stuff
Mounted a Bulkhead at the back of the Cab so we can remove the cab
and not have to worry about the lines that are mounted to the frame.
Just a quick look up at the underside
That's all for this week.
I may have to take a week off so we can figure out where the 57 Chevy is going.
Just need to figure out who,where and when. My Choice are Kenny Davis Hot Rods, Pinkee's or Rad Rides.
Happy Monday all,
Okay skipped last week here Dad bought a new project
and it's eating up what's left of my spare time and it's not even here yet.
more pictures here
http://www.sportmachines.com/gallery/57-Chevy
Should be a fun little Project
Okay back to my project which doesn't seem as cool anymore
Dave was able to bend up a test panel of the rear bumper
Started working on the Fuel System.
Located the FPR in the Intake Valley to keep it clean looking
Fuel Line coming out of the Tank
Into the Aeromotive 100 Micron Filer & A1000 Pump
The second filter is the 10 Micron Filter just to get out the really small stuff
Mounted a Bulkhead at the back of the Cab so we can remove the cab
and not have to worry about the lines that are mounted to the frame.
Just a quick look up at the underside
That's all for this week.
I may have to take a week off so we can figure out where the 57 Chevy is going.
Just need to figure out who,where and when. My Choice are Kenny Davis Hot Rods, Pinkee's or Rad Rides.
warmpancakes
New member
Re: Sonoma GT 0334 - Build Pics
Looking for a new one 53 foot with a f750 to tug it, nice to have rich friends who wont drive their cars :tup:
Syborg Twin Turbo said:
Looking for a new one 53 foot with a f750 to tug it, nice to have rich friends who wont drive their cars :tup:
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
well i was thinking just a 22' aluminum so i could pull it with my Tahoe
warmpancakes said:
well i was thinking just a 22' aluminum so i could pull it with my Tahoe
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Good Morning All,
There is going to be two updates this week as i plan to work all day Saturday on the truck
Wanted to do something different for a steering Stop.
Dave came up with a pretty cool idea don't ya think.
Just some Quick Picks of the Intercooler Piping
All the Hose, V-Bands and Connections were supplied by Jim at:
www.hightempsilicone.com
He makes some really nice stuff and it's not the cheap stuff you find on Ebay.
You can also see the Intercooler which was custom built by Gerhard at:
www.bellintercoolers.com
Turn around time was less then a week and the Quality is top notch
Just another Quick Shot of all the Stainless Piping from:
www.stainlessworks.net
Need to Create the Inner Fenders & Air Boxes this weekend
Your not going to believe it i found an Upper Radiator Hose that Works
Now if i could just find a lower hose
Just a quick shot of the Rear Suspension Stop.
I still need to pay Troy for this.
That's all for today more to come over the weekend
Good Morning All,
There is going to be two updates this week as i plan to work all day Saturday on the truck
Wanted to do something different for a steering Stop.
Dave came up with a pretty cool idea don't ya think.
Just some Quick Picks of the Intercooler Piping
All the Hose, V-Bands and Connections were supplied by Jim at:
www.hightempsilicone.com
He makes some really nice stuff and it's not the cheap stuff you find on Ebay.
You can also see the Intercooler which was custom built by Gerhard at:
www.bellintercoolers.com
Turn around time was less then a week and the Quality is top notch
Just another Quick Shot of all the Stainless Piping from:
www.stainlessworks.net
Need to Create the Inner Fenders & Air Boxes this weekend
Your not going to believe it i found an Upper Radiator Hose that Works
Now if i could just find a lower hose
Just a quick shot of the Rear Suspension Stop.
I still need to pay Troy for this.
That's all for today more to come over the weekend
phoonTy
Truckless. For now.
Re: Sonoma GT 0334 - Build Pics
:drool: :drool:
So... are you getting us all into SEMA so we can see it's debut in 2007? :rotf:
looking good :tup:
I think you get a free Wanted Poster just because this project is so smurfing awesome!... but you have to pick it up in person at Nats.
:tup: :lol:
:drool: :drool:
So... are you getting us all into SEMA so we can see it's debut in 2007? :rotf:
looking good :tup:
I think you get a free Wanted Poster just because this project is so smurfing awesome!... but you have to pick it up in person at Nats.
:tup: :lol:
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
I give it a try but i am not sure i'll even get in
phoonTy said:
I give it a try but i am not sure i'll even get in
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Happy Saturday Night,
What started out as a very productive day didn't end so well.
Just remember Listen to the Voices in your Head they are there for a Reason!
Yep, found a Lower Radiator Hose that actual works.
It's hard to believe it actual follows the curves of the Frame.
Installed the new Fiberglass Cladding.
If you are thinking about adding really cool ground effects to your s10.
You need to contact Scott @ www.syclone-typhoon.com
Yep missing the last piece of cladding this is where my day ended.
Seems I felt the necessary urge to run a 1/4" drill bit 1" deep into the pad of my left Hand.
So my day ended early with a trip to the emergency room to make sure I
didn't have any metal in my hand and a tetanus shot just in case.
More to come later in the week once I can use my hand again.
And remember when the little voice tells you that you should move your hand - Listen!
Happy Saturday Night,
What started out as a very productive day didn't end so well.
Just remember Listen to the Voices in your Head they are there for a Reason!
Yep, found a Lower Radiator Hose that actual works.
It's hard to believe it actual follows the curves of the Frame.
Installed the new Fiberglass Cladding.
If you are thinking about adding really cool ground effects to your s10.
You need to contact Scott @ www.syclone-typhoon.com
Yep missing the last piece of cladding this is where my day ended.
Seems I felt the necessary urge to run a 1/4" drill bit 1" deep into the pad of my left Hand.
So my day ended early with a trip to the emergency room to make sure I
didn't have any metal in my hand and a tetanus shot just in case.
More to come later in the week once I can use my hand again.
And remember when the little voice tells you that you should move your hand - Listen!
QUICK STORM
B.A.M.F. BMW Tech
Re: Sonoma GT 0334 - Build Pics
all the time and money and you didn't install a rack and pinion setup?
all the time and money and you didn't install a rack and pinion setup?
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
yep we've talked about a rack at least 100 times and since i don't plan to be slamming the truck in an autocross track the AGR box soon to be a Flaming Rivers box is more then plenty
QUICK STORM said:
yep we've talked about a rack at least 100 times and since i don't plan to be slamming the truck in an autocross track the AGR box soon to be a Flaming Rivers box is more then plenty
QUICK STORM
B.A.M.F. BMW Tech
Re: Sonoma GT 0334 - Build Pics
how much is the flaming river box?
how much is the flaming river box?
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
$500.00
QUICK STORM said:
$500.00
Syborg Twin Turbo
Syborg Twin Turbo
Re: Sonoma GT 0334 - Build Pics
Happy Wednesday Night.
Stop by the shop to play with some inner fender design and look at the air box.
Hard to tell from the picture but we are going to draw air in from the the indicators.
This gives you an idea of the arc were trying to fit acheive in the inner fenders
Side View
Looking for Opinions
more to come this weekend
- and yes i am going to stay away from power tools this weekend
Happy Wednesday Night.
Stop by the shop to play with some inner fender design and look at the air box.
Hard to tell from the picture but we are going to draw air in from the the indicators.
This gives you an idea of the arc were trying to fit acheive in the inner fenders
Side View
Looking for Opinions
more to come this weekend
- and yes i am going to stay away from power tools this weekend