stg ultimate info

s_blazin

Donating Member
I am having some issues with my chip so i've had a tuning guy locally looking into it but he was hoping to talk to someone from the stg group, about some things.

Is there any current contact info for them besides the email address on the syty chips website, or is that still a valid email address?

Thanks
 
Last edited:

Beavis

Still plays with trucks
Re: stg ultimate contact info

Re: stg ultimate contact info

I don't think they are being produced anymore, therefor you probably won't be able to get any help from them. You might be able to get help from some of the guys on here that are still useing them or used to use them if you post your questions.
 

s_blazin

Donating Member
Re: stg ultimate contact info

Re: stg ultimate contact info

well we've found that the injector constant is set for 49.89lb injectors, which is not what i was told by the prev owner i was told it was set for 55's. but the program does not specify what the fuel pressure should be at. Thats one of the issues we've been trying to figure out is, what should the correct fuel press be set at?

see the truck does not run well at all and since everything is new we are fairly certain it must be that the chip needs to be altered.
 

bundie

New member
Re: stg ultimate info

Sorry but using my phone...

Google powertune plus or ultimate chip for syty
 

sy538

New member
Re: stg ultimate contact info

Re: stg ultimate contact info

well we've found that the injector constant is set for 49.89lb injectors, which is not what i was told by the prev owner i was told it was set for 55's. but the program does not specify what the fuel pressure should be at. Thats one of the issues we've been trying to figure out is, what should the correct fuel press be set at?

see the truck does not run well at all and since everything is new we are fairly certain it must be that the chip needs to be altered.

Yeah they are for 50s, not 55s. I believe fuel pressure is determined by you.

Do you know what version you have? I'm sure the instructions are saved somewhere.

I'm having trouble with the way back machine, but try to see what you can find from when this existed.
http://www.chitownsyty.com/html/tech.htm
 

sy538

New member
Re: stg ultimate info

Yeah I know the link doesn't work, that's why I said "from when this existed". You already found all the info I was looking for anyway.

Run through all the programs on the chip and compare them to the sites you found, if you still can't figure it out post them up.
 

s_blazin

Donating Member
Re: stg ultimate info

Yeah I know the link doesn't work, that's why I said "from when this existed". You already found all the info I was looking for anyway.

Run through all the programs on the chip and compare them to the sites you found, if you still can't figure it out post them up.

sorry it was late and i was tired. headed out to the track with a new toy right now but will do some more digging this evening.

Start at 40psi fuel pressure for the 50# injector versions.

alright i'll give that a shot. although that may already be where i had it set at
 

SY2455

70's Veteran
Re: stg ultimate info

The starting point for the Utimate chip fuel pressure was 50 psig. On my truck it will run best at 45 psig.
 

s_blazin

Donating Member
Re: stg ultimate info

bought a new toy thats been taking up my time but friday i borrowed an LM1 AFR tool and when running the ratio started at 14.0 and leaned out all the way to 19.5 in about 30 seconds and then started over. 14 ish to 19ish. and while doing this the idle is changing about 300 rpm's.

so i'm thinking maybe i need to look somewhere else at a mechanical issue and not the chip or ecu.

Thoughts on this???
 

s_blazin

Donating Member
Re: stg ultimate info

yes brand new 3 bar map, but heres the weird part, i swapped the 3 bar for what i am fairly certain of was a 2 bar and it didn't seem to run any different. so i switched back
 

s_blazin

Donating Member
Re: stg ultimate info

so i know there isn't any support for the ultimates anymore but my tuning guy is really interested in just getting to chat with the person that wrote the chips.

does anyone have any leads on how to get ahold of that person.
 

s_blazin

Donating Member
Re: stg ultimate info

well i sent an email to the contact on the sytychips website but i doubt anyone will respond.

come on i'm sure someone out there must know this guy somehow. Info from him would greatly decrease the time it takes to get my truck back on the road. as of now once we do a drive test and he watch's the truck and all the afr's and whatnot it may end up having to get dyno tuned with only a 2 program flip chip.
 
Last edited:

dgoodhue

BuSTeD 4.3
Re: stg ultimate info

Todd Austin is the person who did the hardware for the Ultimate, he hasn't had a Typhoon is over 10 years. Brian Green is the person who did the tuning. He hasn't had a SyTy is a good 7-8 years either. Their were other people behind the scenes as well that contributed to the design.

What kind of questions does your tuner have? Does he have tuning questions? Does questions on how to make the different tunes work on the ultimate chip hardware?
 

s_blazin

Donating Member
Re: stg ultimate info

I'm not sure of the specifics but i'll ask him to post up if he can next time we speak.
 
Top