Stock appearing turbos...

TurboManiacal

Donating Member
stock turbos max out in effeciency at what I consider low boost levels...anything above 17psi or so I think your just spinning your wheels so to speak.

Greg! No shit! Tell him I think Germany is the bomb! I talked to him just before I came over to your place last april. He loves it when I drop in to see him. I've known greg since 94 when I started working there...then I graduated from college and got in the Army. Lets see...Geoff is working at that dealership now...but he's a tard (really borderline alcohol fetal syndrome or something going on there) and there's a few others...name the mechanics I might know one or two...
 

TurboManiacal

Donating Member
Coloty said:
Matt Burns is the Service Manager over at Elway (old Emich) GMC on county line right by Bozo. He has a 93 Phoon and is quite helpful on service and parts.

Holy crap! Tell Fat Matt hello for me too! He's a trip..or was...one time to save money he put bravada tires on his buick rivera...talk about crossing an SUV w/ a car...my bro said he had bought a Ty...but that was years ago and I hadn't seen him since 98 or 97...
 

smeagol

Active member
I don't think there is anything you can do calibration-wise to make a 20g with 14cm2 spool well on a stock truck with stock converter. I tried... some things helped.. but nothing on a seat of the pants scale, where it made the 20g even close to acceptable, spool-wise, IMO.

Might think of having a custom turbo done by Reed at www.turborepair.com

He may have something that looks very stock that would flow lots better than 20g.
 

Will_in_China

Truckless Wonder
smeagol said:
I don't think there is anything you can do calibration-wise to make a 20g with 14cm2 spool well on a stock truck with stock converter. I tried... some things helped.. but nothing on a seat of the pants scale, where it made the 20g even close to acceptable, spool-wise, IMO.

Might think of having a custom turbo done by Reed at www.turborepair.com

He may have something that looks very stock that would flow lots better than 20g.

Thanks Greenie,
I will give Reed a call later today.
I know hartman has some uber small housing 950 cfm custom super-custom turbo, so I'm sure it can be done...
Maybe I'll just hand him a stock turbo and a wad of cash and see what happens...

-Will
 

Will_in_China

Truckless Wonder
Sigo said:
Coloty said:
Matt Burns is the Service Manager over at Elway (old Emich) GMC on county line right by Bozo. He has a 93 Phoon and is quite helpful on service and parts.

Holy crap! Tell Fat Matt hello for me too! He's a trip..or was...one time to save money he put bravada tires on his buick rivera...talk about crossing an SUV w/ a car...my bro said he had bought a Ty...but that was years ago and I hadn't seen him since 98 or 97...

Dan is one of the techs there that's pretty cool.
I've met Matt before, his truck is always there.

Greg told me to tell you that since you blew him off on the best man thing, it's about time you went and had a kid... :wink:

-Will
 

turbodig

Active member
Re: Stock appearing turbos...

Will_in_Denver said:
Only one thread from the archives and nothing on the BB.
The archives post was between lew and dig in 1997!

Who's running the TD06H-20G-14cm still?
What's changed since then?
Ceramics and dual ball bearings? :D

Are there any other direct bolt up turbos that don't suck?
-Will

Maybe we can get Lew on here and have a followup... ;)

I'm still running the 20g-14... still works fine.
Runs 12.20s in the heat....

If you put a decent WG spring in and fix the WG Duty cycle in the chip, you can run it without a converter, but I'd really recommend one, at
altitude.

It really needs a good porting job right out of the box, but so does the
stocker. I've been porting 'em for a few guys fairly successfully.

You can always get a custom one done up with bigger compressor wheels and such, but it's a somewhat expensive proposition. (Would cost as much or more than a new Garrett turbo) If you're looking for stealth, though, you can really do a lot with a sneaky-built 20g.

I believe Mike @ ARA did custom ones, or knew somebody that did. Might want to give him a holler if you decide to go that way.

Later,

Dig
turbodig@yahoo.com
12.08@111
1.70 60-ft on Original tires.
 

Will_in_China

Truckless Wonder
Re: Stock appearing turbos...

turbodig said:
Maybe we can get Lew on here and have a followup... ;)

I'm still running the 20g-14... still works fine.
Runs 12.20s in the heat....

If you put a decent WG spring in and fix the WG Duty cycle in the chip, you can run it without a converter, but I'd really recommend one, at
altitude.

It really needs a good porting job right out of the box, but so does the
stocker. I've been porting 'em for a few guys fairly successfully.

You can always get a custom one done up with bigger compressor wheels and such, but it's a somewhat expensive proposition. (Would cost as much or more than a new Garrett turbo) If you're looking for stealth, though, you can really do a lot with a sneaky-built 20g.

I believe Mike @ ARA did custom ones, or knew somebody that did. Might want to give him a holler if you decide to go that way.

I will check with Mike as soon as I get closure from that place that Greenie mentioned. If you are on here Mike, and can do some stealthy stuff let me know what you can do.

If you have any "recipe" links I can follow before asking how you did the springs and chips, research in general or whatever, drop 'em and I'll jump into it.

Sneaky built 20g sounds like a home run in this case...
What cool things were you thinking?
If you were looking for a "cohort in crime" in this area, let me know...
I would love to convince a 20g/14cm into spooling on a GM warrantied tranny... :eek:
:D

This might be a fun little side project until my warranty craps out!
Anybody want to buy a GN or Turbo Regal???
Please?
Need more syty time and money...
:wink:

-Will
 

TurboManiacal

Donating Member
Re: Stock appearing turbos...

Will_in_Denver said:
This might be a fun little side project until my warranty craps out!
Anybody want to buy a GN or Turbo Regal???
Please?
Need more syty time and money...
:wink:

-Will

Dammit....why didn't you offer me the GN when I was over at your house! I might have done it!

What's it run in the qtr? I know what your roommate told me you bought it for...how much to sell though?
 

Will_in_China

Truckless Wonder
Re: Stock appearing turbos...

Sigo said:
Will_in_Denver said:
This might be a fun little side project until my warranty craps out!
Anybody want to buy a GN or Turbo Regal???
Please?
Need more syty time and money...
:wink:

-Will

Dammit....why didn't you offer me the GN when I was over at your house! I might have done it!

What's it run in the qtr? I know what your roommate told me you bought it for...how much to sell though?

For you, $500 less than my buying price.
Fair?
I'll take it in the pants 5 bills, give you the new powdercoated turbo cover, and killer valve covers too.
Please, just take it.
I need to get ty cash and get rid of some of the cars...
PLEASE, find a buyer for me.
I think it needs a fuel pump, I even have one.
Ran a 12.2 with the dudes wife driving (2.2 60') and not using the 125 shot...
 

TurboManiacal

Donating Member
damn you make a good offer...do you deliver? Seriously...I need to look at this Ty over here first. I'll let you know later this weekend. That is an incredible deal.
 

Will_in_China

Truckless Wonder
Sigo said:
damn you make a good offer...do you deliver? Seriously...I need to look at this Ty over here first. I'll let you know later this weekend. That is an incredible deal.

Just don't screw me too bad...
:D
I need to get out of it.

Find someone to buy the TR for 3 grand too.

-Will
 

TurboManiacal

Donating Member
Hmm would delivering it to Orchard Road be a strain on you? (psst...do it late at night so my wife doesn't see you...she just hopped a flight back there while I'm stuck here...)

Leave a note on the windshield saying the following:

Jen,

Ryan said f*ck this sh*t....I'm getting a GN. He wants you to ship it back to Germany for him...he doesn't care that you said he couldn't have a new car.

-Will
 

Will_in_China

Truckless Wonder
Sigo said:
Hmm would delivering it to Orchard Road be a strain on you? (psst...do it late at night so my wife doesn't see you...she just hopped a flight back there while I'm stuck here...)

Leave a note on the windshield saying the following:

Jen,

Ryan said f*ck this sh*t....I'm getting a GN. He wants you to ship it back to Germany for him...he doesn't care that you said he couldn't have a new car.

-Will

Orchard shouldn't be a problem as long as the fuel pump doesn't cut out again. Laziness preventing replacement (Ok, actually Typhoon preocupation).

The exhaust is big enough for you to stuff your fist all the way up to the exhaust side of the turbo, so I don't think it will be sneaking anywhere...

-W
 
Top