Sy112, didn't even take note that you are located in Kansas! I have had my truck since 99. Not too many Syclones around these parts, so it definitely could have been my truck.
I am using an XBC brand MBC which worked great on my stage 3 WRX and I figured since I had it sitting in my spare parts box I would give it a try. Man I am glad I did, because the truck is running well now with maybe a .25-.50 boost spike max.
I have always preferred letting the ECU control the FBC, and until the WRx had always shyed away from MBC's and other stand-alone boost controllers.The WRX taught me a lesson though, and that was that if the FBC solenoid was substandard to begin with then having a piggy-back or re-programmed ECU was still going to net you poor boost control due to the weak-link FBC.
I hear a lot of folks talking about the internal WG of the stock Sy/Ty turbo being a weak link for being able to get consistent boost control. I believe its definitely less effective than an external wastegate, but I have to wonder if the FBC isn't a big part of the problem as well.
I am in the process of getting my truck to the point of change-over to the ultimate/3bar chip set-up similar to you. I already have the 3-bar map sensor, and am getting ready to order an AFPR next week. So heres a question for you. The ultimate chip recalibrates against the 3bar map sensor, and fuels/times accordingly. I realize that Ultimate V6/V7 has some nice boost maps to drive the FBC, but since the 3bar map sensor and fueling are exclusive of the actual boost control, it would seem like you could easily run an MBC( or perhaps a beefy twin solenoid EBC like a Blitz SBC-id, or DBSC, or Greddy Profec B) and still enjoy the benefits of the 3bar fueling capabilities over 14.7 psi.
I guess I just don't trust the FBC much at this point.
Well keep me posted on your progress with your Ultimate and I may be picking your brain as well when I get ready to make that move!
BTW: heres my email address for future reference. Also if you are going to be in the area drop me a line, and maybe we can hook-up!
jredding@usmo.com
Ps- also take a look at the latest from Hallman!
http://www.boostcontroller.com/
The remote adjuster version MBC is very cool! I have been thinking about buying one for my EVO since I have the XBC in use on my Sy!
Later!