Sy with injection problems

Hi

I have a Sy with the Kenne Bell custom chip made
for 40 lb injectors(8026-40).
At standstill and giving WOT, the car is hesitating.
I had a garage check it and they say it gets too much fuel.
I should lower the fuel pressure and use the stock injectors instead.
But I have Kenne Bell fuel reg that has a minimum of 30 psi.
And they want me to try with 20 psi.
Has anyone ideas or solutions?
I have a set of stock injectors ready for mounting.
And I dont have the stock chip!

Help...
 

turbodig

Active member
Re: Sy with injection problems

THe KB 40# chip was lousy.

Your hesitation is likely due to an overboost issue, or an ignition issue, or simply, the lousy chip.

Put the stock injectors in. Your KB chip can be reprogrammed to be a stock chip.
You can submit a 'Wanted' ad for a stock chip as well. Someone here will have one.
 
Top