SyTy ECM...?

Lowaholic

New member
Hey all- I picked up an ECM at a local boneyard today, the guy swears up & down that it came out of a Ty. No part #s on it tho. It has a 'remanufactured by Delco Electronics' label with a service # of 1228707. Is this a correct service #? It looks like the right ECM, it's got the 3 harness plugs and the far one is yellow, but...??

Thanx for any help :D
 

sytyguy

Moderated User
The 1228707 is out of an '89-'91 DOHC 2.3L Quad 4 car (Vin D or A). Takes a 27C256 prom.

AFAIK, it will not work.

Hood
 

Falco

Donating Member
Yep, Michael is right. Our ECM is #1227749, AFAIK no other part number will work. The Quad 4 cars used the same ECM in '88 only...

Later,
 

Lowaholic

New member
yeah, thats about what i figured. Well thats just f&kkin great. Boy am I gonna give that guy a punch in the head tomorrow...
::steamer: ::shithitfan::

So the service # is the same as the part #?
 

sytyguy

Moderated User
Not exactly.....I know that 16198263 is the service equivalent to the 7749. You should be able to find a boneyard one by one of those numbers. FWIW, Scot Sealander (in response to Ludis) commented on the 8707 vs 7749 on the GMECM list back in '99. Here's what they had to say:

--------------------

Doesn't seem to be. 1228707 was used with Q4's 1989-91. 1228708 is the underhood version (1990-91). What's inside the 8707?

The usual. Very similar to the 1227749, less the A/D mux. Some kind of small SOIC added to the fuel logic. Never did fire up the 'scope to see what it did. Perhaps true alternating fuel firing....like TBI.

Is it a different PCB?

Yes. 79A433

Perhaps a differently populated 730/749?

No, not directly. Just similar.

Perhaps the 8707 adds the quad driver back in.

No. Still has the location unpopulated.

I've only ever seen two Q4's in the junk yard, and they were both 88's with 749's.

I have seen a lot of them here.... Seem to have two different intake manifolds. One almost looks like a set of headers, the other is more like a common plenum. I really don't know anything about them though. The tables are also set up to handle higher RPMs than the usual GM stuff.

-------------------

HTHs

Michael
 

Lowaholic

New member
sweet- thanx tons for the info. Was beginning to hope that maybe I could just use that one anyways but I guess that answers that question.

Eh well- anybody need an 8707?

:roll:
 

Lowaholic

New member
UPDATE- well possibly good news, I tracked down an ECM from an '88 Grand Am with the 2.3L Quad-4. This one is missing like 1/2 of the case label, but what is left of it has the bar code and " *868263WZ41053355* ". I have no idea how to try and decipher this, but the PROM is an AMDD8389 which I believe is definitely the correct bc for that vehicle (if memory serves)...?
Is there any way to verify other than the case label, like a main board ID # or anything?
 
Top