Time for a chip. What?????

Treymen

Donating Member
Re: Time for a chip. What?????

That is the other option I was considering. Just so much investment to get it going. And I'm not real computer savy.
 

Fighting5thSVT

Active member
Re: Time for a chip. What?????

I just had Hood tune me up a 3 bar chip. So far, I am very happy with it:tup:

I have some of the changes he made if you are interested.
 

turbodig

Active member
Re: Time for a chip. What?????

that is a great price, thanks. I see that it says it has the ability to burn chips. Wont I still need a 3-bar chip to start with?

You download a file for free. Problem solved.

You'd need a wide-band in addition to the above... you're not going to be able to tune much without.
 

Treymen

Donating Member
Re: Time for a chip. What?????

Ok, thats the piece that was missing. So you keep the AutoProm in the truck at all times. I assume I unplug the Pitbull and this takes it's spot?

Hmmm, it's about the same as a new 3-bar chip, but with so much more room for activities!
 

syclone rider

New member
Re: Time for a chip. What?????

Do it man i just started messing around with code 59 but a much better tune overal than just a pitbull chip plus you can turn up the boost!
 

Treymen

Donating Member
Re: Time for a chip. What?????

Do it man i just started messing around with code 59 but a much better tune overal than just a pitbull chip plus you can turn up the boost!



With the pitbull, I'm already running 21#'s of boost. I need it to go down.
 

Ty0279

Historically Significant
Re: Time for a chip. What?????

With the pitbull, I'm already running 21#'s of boost. I need it to go down.

Why is the boost so high? 21lbs + 2 bar MAP/chip + 92 octane = bad news

What are you using for boost control?
 

turbodig

Active member
Re: Time for a chip. What?????

Why is the boost so high? 21lbs + 2 bar MAP/chip + 92 octane = bad news

What are you using for boost control?

Depending on how much fuel pressure you threw at it (like 60 psi base), you could get a pitbull to work with that kind of boost. They were fixed duty cycle, so rod tension determined your boost, essentially. With race gas, it sorta worked. I ran mid 12s on a Jet chip that way.

92 octane + 21 psi is generally a bad thing, though. If it hasn't hurt something already, it will.
 

Treymen

Donating Member
Re: Time for a chip. What?????

Which is why I've been VERY easy on it. No boost launches and yaking my foot out of it when it hits 15#'s. FP is about 44 at idle and cruising speeds. Jumps to @65 at WOT.
 

turbodig

Active member
Re: Time for a chip. What?????

Which is why I've been VERY easy on it. No boost launches and yaking my foot out of it when it hits 15#'s. FP is about 44 at idle and cruising speeds. Jumps to @65 at WOT.

I was talking 60# base... would be 75 at 15 psi.

Crank the WG rod out 2-3 turns, until the boost comes back to sanity. 15-16 psi on a pitbull is generally fine.
 

Treymen

Donating Member
Re: Time for a chip. What?????

Ok, just got all the stuff. Moates, G1, PLX. Downloaded TPRT.
Do I need a gauge for the PLX?
Once I have tuner pro installed, what do I need for code59?
Do I need anyother stuff or parts?
 
Top