timeing help

93 typhoon

New member
Hello guy's just woundering if some one can help me with this. I was checking the spark advance on my truck and the scan tool read 23* in idle isn't it spose to be in 0* in idle?
thanks
 

SY-1193

Active member
Re: timeing help

did you disconnect the connector on the TAN wire on the passenger side under the carpet near the firewall? With this disconnected you should read 0°.
 

93 typhoon

New member
Re: timeing help

SY-1193 said:
did you disconnect the connector on the TAN wire on the passenger side under the carpet near the firewall? With this disconnected you should read 0°.
no. but were should it be with it on in idle.
 

SY-1193

Active member
Re: timeing help

it sounds like it is in the ballpark...the only way to really tell is disconnect that tan wire and read it. It is just a guess otherwise.
 

SY2932

Administrator
Re: timeing help

SY-1193 said:
did you disconnect the connector on the TAN wire on the passenger side under the carpet near the firewall? With this disconnected you should read 0°.

Correct:
IMG_0569.sized.jpg

"The ESC Electronic Spark Timing "tan wire with a black stripe" that everyone can't find when attempting to set their timing (s-series). Wire is under the carpet on the passenger side below the heater box. It is disconnected to set the timing, then reconnected."
 

93 typhoon

New member
Re: timeing help

thanks guy's figered out what i wanted to know. i new that the electronic spark timing tan wire was under passenger sid. my friend told me what i wanted to know. thanks all for the help
 
Top