Osmosis
New member
I 've got two issues going on with my TY.
First, I changed out my boost valve to the stock boost controller. I was only getting 12 psi of boost when I had the desired boost set to 16psi. I messed with the duty cycle tables (2 of them) and set them from around 30-39 to 80 across the board. I seem to get close to 16psi, but when I"m WOT, boost seems to fall back to 12.5-14ish.
I did a few data runs and I noticed my Tuner Pro is not seeing my boost now? WTF?
Any help would be greatly appricated!:tup:
First, I changed out my boost valve to the stock boost controller. I was only getting 12 psi of boost when I had the desired boost set to 16psi. I messed with the duty cycle tables (2 of them) and set them from around 30-39 to 80 across the board. I seem to get close to 16psi, but when I"m WOT, boost seems to fall back to 12.5-14ish.
I did a few data runs and I noticed my Tuner Pro is not seeing my boost now? WTF?
Any help would be greatly appricated!:tup: