Tunerpro Fixes

sytyguy

Moderated User
Been playing around with the Autoprom for the last few days and getting acquainted with Tunerpro. Few things I noticed that seem off in Tunerpro:

- TCC Lower Temp Limit - scalar is off high and unit of measurement is in time.
- TCC Road Speed Upper Lock Limit - scalar seems to be high by about 10 mph.
- TCC Road Speed Lower Lock Limit - scalar seems to be high by about 10 mph.
- Hi RPM Fuel Cutoff Thresh. Hi Limit - scalar is off low.
- Hi RPM Fuel Cutoff Thresh. Lo Limit - scalar is off low.
- Lower MPH for Boost Disable - scalar is off low.
- Upper MPH for Boost Disable - scalar is off low.
- EGR Desired % vs Vac and RPM - % heading is blank and table is scattered.

I haven't been through everything, so I may have overlooked a few. And I may be missing something (very possible with how tired I am), but I tried multiple bins and different xdf files all with the same result. Currently using the newest versions of Tunerpro & xdf file. FWIW, I'm comparing to Promgrammer and actual data readings from my truck.

Anywho, I just wanted to compile a list of things I noticed while they were fresh in my mind.

Hood
 

Ian Turgeon

Cascading Inspiration
Re: Tunerpro Fixes

havent run into any of these but havnt been doing anything with them either.

I noticed the high/low values for vacuum to be way off in the xdf, doesnt graph well.
 

sytyguy

Moderated User
Re: TunerPro Fixes

Re: TunerPro Fixes

sytyguy said:
Currently using the newest versions of Tunerpro & xdf file.

The ones pulled right off the nwstp site last night as well as prior to 4/12/05.

Hood
 

JSM

Active member
Re: Tunerpro Fixes

You are correct and good info. We will work on adjusting formula's.

Next big question is what they need to be.

My disassembly doesn't help either

LC0D0: FCB 140
;0x00D0 KKCCTMPL TCC Lower Temp. Limit 65.00 Sec.

LC0D1: FCB 5
;0x00D1 KCOASTHZ TCC Hysteresis for KCOAST1/2 0.02 %

LC0D2: FCB 80
;0x00D2 KRSCSTK TCC Road Speed Coast Level 25.0 MPH

LC0D3: FCB 10
;0x00D3 KCOAST1A TCC Low-MPH Coast Load Limit 0.0 MPH

LC0D4: FCB 10
;0x00D4 KCOAST2A TCC High-MPH Coast Load Limit 0.0 MPH

LC0D5: FCB 255
;0x00D5 KREL1A TCC -Delta Throttle Pos. Unlock Limit 1.00 %

LC0D6: FCB 21
;0x00D6 KREL2A TCC +Delta Throttle Pos. Unlock Limit 0.08 %

LC0D7: FCB 25
;0x00D7 KLCKDLYT TCC Delay Before Lock (Conditions Met) 2.5 Sec.

LC0D8: FCB 0
;0x00D8 KLKDLYT2 TCC Coast Release Lock (Low Road Speed) 0.0 Sec.

LC0D9: FCB 0
;0x00D9 KLKDLYT3 TCC Coast Release Lock (High Road Speed) 0.0 Sec.

LC0DA: FCB 134
;0x00DA KRSHNTHK TCC Road Speed Upper Lock Limit (3rd Gear) 41.9 MPH

LC0DB: FCB 128
;0x00DB KRSHNTLK TCC Road Speed Lower Lock Limit (3rd Gear) 40.0 MPH

You can also see there are unit errors on disassembly that got transfered.
 
Top