Tunerpro RT dash config.

4C FED

Absolutum Dominium
I just got my ALDL cable & downloaded Tunerpro RT, just for data logging at this point.
I have some questions:

1. Can you have more than 6 cells on the dash?
2. If so, how to add cells?
3. What sensors/parameters do I want to have on the dash?

Thanks
 
Last edited:

JSM

Active member
Re: Tunerpro RT dash config.

you can only have the ones you see in tunerpro, you can right click and select different value though.
 

SBNova

New member
Re: Tunerpro RT dash config.

#3- It depends what I am doing. If your tuning for cruise it might be Kpa, Rpm,TPS, desired AFR, actual AFR, spark advance, knock retard, MAT , and coolant temp. Maybe sometimes BLM or INT.
 

4C FED

Absolutum Dominium
Re: Tunerpro RT dash config.

I downloaded the ALDL def. file from NWSTP. I don't see "Actual AFR" in the list. Is this only applicable for wideband o2 operation?
 

skwayb

NWSTP
Re: Tunerpro RT dash config.

4C FED said:
I downloaded the ALDL def. file from NWSTP. I don't see "Actual AFR" in the list. Is this only applicable for wideband o2 operation?

SBNova was quoting $59 fields :tup: . On Stock Code it is Target AFR and if you have a Wideband with the Wideband 02 patch on your bin, it will display the AFR in that field.
 
Top