Tuning Help

WyoSyclone

Active member
Re: Tuning Help

Sorry for the trouble but I'll make it up to you somehow. :tup:

Oh no prob.... I love doing this stuff :D But, I need to go put steaks on the grille... it'll take us about 45 minutes to eat. If you don't have the XDF and .ads files, PM me your email address and I'll send them over to you... that'll be our first step.
 

Nitrous

New member
Re: Tuning Help

Yes, I have your bin and it says xdf file - 6efdf next to it. Take your time, I'm fixing to put burgers on the grill myself as we go back and forth.
 

wildphil

I Love My Ty's
Re: Tuning Help

After you make a log file in Tunerpro. Copy the cells in Tunerpro in table 29x then paste that info in autotune at the first blue paste from tunerpro were the empty cells are.....it also says average afr, Then in Tunerprort table f29_AFR copy those cells. take that info to autotune scroll down to the next paste from tunerpro.......it also says desired afr and paste it there. Next go dack to tunerpro click tools, ALDL/DATALOGGING, setup, click the botton that says export selected session to CSV. This will copy the log on the drive you just made to excell. Find this file then copy this file and take it to autotune.At the tab that is labled Paste CSV already on clipboard into raw data tab. Autotune will calculate the adjustmants for you. The next thing I do is in autotune I scroll down to were it says calculated in the green tab........suggested VE. These cells will now have numbers in them. The ones changed will be colored cells. I just copy the ones that change and take this info to tunerpro.open table 29x and paste the info into the exact spot that they were copied from. You can copy the whole think from autotune and copy it to the 20x table if you wish. Next on the 29x table click the save button at the bottom. Then click file, save bin it the top on tunerpro. Then in tunerpro click tools at the top, emulation, I think next it says upload current bin. This loads your adjustments to the ostrich. Now take it for another drive and log again. Do this over and over.

I hope this is correct. This is from memory.
Please you guys that are good at tuning please look this over and post anything I said is wrong or I left out.
 

wildphil

I Love My Ty's
Re: Tuning Help

By the time it took me to type all the stuff on my last post with 2 fingers you guys posted 5 or 6 times.:oops:
 

wildphil

I Love My Ty's
Re: Tuning Help

If I remember correctly only one of the cells is used when the egr is not used. But all of the cell need the same number in them when the egr is used. So just go ahead and change all of them when you change the number. There is a table to disable the egr also. When Rob comes back we will see if he knows the one. If not I will go search for it.
 

WyoSyclone

Active member
Re: Tuning Help

If I remember correctly only one of the cells is used when the egr is not used. But all of the cell need the same number in them when the egr is used. So just go ahead and change all of them when you change the number. There is a table to disable the egr also. When Rob comes back we will see if he knows the one. If not I will go search for it.

"KEGRTEM1" under constants.... max it out at 151c and egr will never enable. Flag 32 'not checked', I believe.
 

Nitrous

New member
Re: Tuning Help

I'm still here, just making adjustments and I'm at 11.5 AFR so I need to change about 10 more points it looks like.
 

WyoSyclone

Active member
Re: Tuning Help

I'm still here, just making adjustments and I'm at 11.5 AFR so I need to change about 10 more points it looks like.

Yup, give it a try and see where you end up...... I wonder why it's so different from mine? What are the mods on your engine?
 

Nitrous

New member
Re: Tuning Help

I had to take it down to 147 and it's running 14.7 AFR now at idle and temps look good. It's running leaan at WOT now so what table should I move to now?
 

WyoSyclone

Active member
Re: Tuning Help

I had to take it down to 147 and it's running 14.7 AFR now at idle and temps look good. It's running leaan at WOT now so what table should I move to now?

Well, you really don't want to be going to WOT until we make sure it's looking good going there. How are things at cruise, part throttle, and light load?
 

Nitrous

New member
Re: Tuning Help

I wasn't really WOT just punched it a little. Things are bouncing around lean cruise and part throttle around 13.0 I'm running the factory boost controller.
 

WyoSyclone

Active member
Re: Tuning Help

I wasn't really WOT just punched it a little. Things are bouncing around lean cruise and part throttle around 13.0 I'm running the factory boost controller.

I would keep making runs and note those places where you're lean, then go into f29x and start richening them up... I like doing that in the graph where you can visually see what the other cells are like around the area you're modifying. Part throttle sounds OK for now.... just keep slowly expanding the throttle and rpm range and building the correct AFRs into those ranges.... if you're datalogging you can send them over to me and I'll take a look.
 

Nitrous

New member
Re: Tuning Help

My AFR is bouncing from 14.2 to 15.0 at idle but I drove it to work and the gas mileage was great! I didn't getinto it but AFR stayed around 14.2 which is a little lean. I'm going to go make a couple of normal driving passes and log them and we'll see what data we get and make changes from there. Hopefully I'll hear from you tonight when I email you the file. I've got like 8 free logs left. This is fun :rotf:
 
Top