Re: Tuning Help
After you make a log file in Tunerpro. Copy the cells in Tunerpro in table 29x then paste that info in autotune at the first blue paste from tunerpro were the empty cells are.....it also says average afr, Then in Tunerprort table f29_AFR copy those cells. take that info to autotune scroll down to the next paste from tunerpro.......it also says desired afr and paste it there. Next go dack to tunerpro click tools, ALDL/DATALOGGING, setup, click the botton that says export selected session to CSV. This will copy the log on the drive you just made to excell. Find this file then copy this file and take it to autotune.At the tab that is labled Paste CSV already on clipboard into raw data tab. Autotune will calculate the adjustmants for you. The next thing I do is in autotune I scroll down to were it says calculated in the green tab........suggested VE. These cells will now have numbers in them. The ones changed will be colored cells. I just copy the ones that change and take this info to tunerpro.open table 29x and paste the info into the exact spot that they were copied from. You can copy the whole think from autotune and copy it to the 20x table if you wish. Next on the 29x table click the save button at the bottom. Then click file, save bin it the top on tunerpro. Then in tunerpro click tools at the top, emulation, I think next it says upload current bin. This loads your adjustments to the ostrich. Now take it for another drive and log again. Do this over and over.
I hope this is correct. This is from memory.
Please you guys that are good at tuning please look this over and post anything I said is wrong or I left out.