Tuning Tutorials

sytyguy

Moderated User
Been meaning to do this for years and never got around to it. Had a slow day yesterday and (despite being hoarse) I decided to get the first video done. In the end there will be several videos showing everything from hardware connectivity to advanced tuning stuff, but to start with I made a quick TunerPro setup tutorial. For the time being, we'll be hosting the videos over on www.sytysolo.com but may ultimately move this stuff over to www.sytyrepair.com (I haven't done anything with that domain in years).

Anyhow, here's the link:

http://www.sytysolo.com/multimedia/tuning-tutorials/

Yep....I know how I sound and I know I misspoke occasionally, but I wasn't shooting that video again. :D If anyone needs something specifically addressed, LMK and I'll make a quick video. I should have the hardware video up by the weekend with the others to come as I have time to knock them out. Also, watch in 720p in fullscreen to see in detail.

Updated: Added the Hardware video. See link above.
 
Last edited:

WyoSyclone

Active member
Re: Tuning Tutorials

Great job Michael!
One thing you may mention in a future video is the ability to make changes to the tune while looking at the graphs, rather than the numeric tables. A lot of times I find I can better visualize what is going on with the tune when looking at the graph (say f29x).

If you can shown how to move, zoom in/out, and rotate the graph that would be great. Then show how they can grab a section of the graph, as well as individual values.

I'll look forward to seeing your next vid :tup:
 

sytyguy

Moderated User
Re: Tuning Tutorials

Great job Michael!
One thing you may mention in a future video is the ability to make changes to the tune while looking at the graphs, rather than the numeric tables. A lot of times I find I can better visualize what is going on with the tune when looking at the graph (say f29x).

If you can shown how to move, zoom in/out, and rotate the graph that would be great. Then show how they can grab a section of the graph, as well as individual values.

I'll look forward to seeing your next vid :tup:
Yeah, that was planned for the advanced tuning video. :tup:
 

JSM

Active member
Re: Tuning Tutorials

I am confused, do you have a 080 level course available?
 

BMFB

Not to scale
Re: Tuning Tutorials

fun tip, if you use the stock bin and just let her rip, she's set to run 22 psi
 

SEL777

One of 101
Re: Tuning Tutorials

Thanks Hood, I'll take all the help I can get. I will review my old power point one too from NATS '09.
 

cat-vi

Ty Wannabe
Re: Tuning Tutorials

Great stuff, thanks for the information, wish somebody could do a "tuning for dummies" with bigstuff3. But I get it, dummies should not use the BS3:)
 

It's just a six

Super Member
Re: Tuning Tutorials

I did not get to look @ complete vid, but what I did see was great!
Maybe with more of these tutorials, I can finally get my TP5 to work & also get my Moates autoprom to work.

Great vids & definately would like to see more. :tup::tup:
 

sytyguy

Moderated User
Re: Tuning Tutorials

Thanks for the feedback guys.....glad it's helpful. I should have the hardware video up tomorrow. I drove off without my camera today or else I'd go film it now.
 
Top