Black Knight
I Glow Therefore I am
Re: Tuning Tutorials
I have RT, bought it last week.
I have RT, bought it last week.
Unusual. Snap a screenshot of what your TunerPro RT screen looks like (print screen >> paste in MS Paint >> save as jpg >> upload to tinypic.com >> post here). It should look like this:I have RT, bought it last week.
Datamaster does not have bin editing or emulation capabilities....only datalogging and real time data viewing. In order to edit the bin file and have datalogging capabilities, you would need Tunerpro RT. Tunerpro RT really unlocks the full potential of the Ostrich for our trucks by allowing you to datalog and edit the bin info at the same time including such features as emulation, data tracing, etc....I use datamaster to log but im planning on upgrading to the ostrich/g1 adapter. Is it necessary to have tunerpro or can I emulate through datamaster? I feel like i wasted $130 on datamaster when i should have just opted for tunerpro..
Real soon.....I swear.
Will do. I've been wrenching on the truck a good bit lately, so it's not been that driveable as of late. Once it's roadworthy again (prob this weekend), I'll make some more videos.
On deck: How to Datalog & Emulate
After that: How to Interpret your Datalog
Later on: Making Bin Changes based off of Datalog Info
That will probably one of the last things I'd touch as it doesn't pertain to the majority of trucks. What questions did you have specifically? Tuning for alky/meth/H2O is no different that normal tuning. Depending on what you use, you may have to pull some fuel out at WOT and might be allowed to run more timing at WOT. If using a kit with a progressive controller, you would need to taper fuel down and taper timing up in accordance with the controller's behavior.Can you include a bit on alky AFRs and timing please?
Great work Mike!
Will do. I've been wrenching on the truck a good bit lately, so it's not been that driveable as of late. Once it's roadworthy again (prob this weekend), I'll make some more videos.
On deck: How to Datalog & Emulate
After that: How to Interpret your Datalog
Later on: Making Bin Changes based off of Datalog Info