Re: Ultimate Jumping Programs
Had this before also...
Reseat your chip and carrier to start.
Make sure the shielded covering (the braided metal surrounding the wires) in the black wire is grounded to the ecm aluminum case. Directions show the shielding braid squashed between the case and the cover for the chip on the ecm for grounding.
Also check the ecm ground it is in a crazy place that you would never guess...
The ecm ground wires are grounded to the bolt near the front of the lower intake behind the alternator in the engine compartment. Clean up the grounds there and make sure it is metal to metal there.
This fixed things up for me.
Good Luck!:tup: