Ultimate Ver. 7 & Code 59?

James Thomas

"NO CLASS"
Hey guys, I am considering a Ultimate Ver. 7 (gauge style) and I am courious as to if the new Code 59 will work with the Ultimate set up? I like the idea of the new features of the Code 59 but also want to have the quick change adjustibility for different timing and boost settings. I know the Ultimate can be "reburned" with new tunes, just need to know if the Code 59 will work with it?

Thanks!
______
James
 
Last edited:

SBNova

New member
Re: Ultimate Ver. 7 & Code 59?

I have no experience with ultimate chips. What I do know is that Moates sells different bin switchers that you could load multiple bins into (code $59 or whatever) and switch on the fly with no problem. They sell one that will switch up to 16 different bins, and they also sell a two bin switcher.
 

leroy

Donating Member
Re: Ultimate Ver. 7 & Code 59?

Each code 59 bin takes twice as much space as an ultimate bin. I'm not that familiar with the Ultimate hardware, but I would guess it would work, or could be made to work. The display would not be accurate, and you would only have room for half as many options. The Moates switching hardware may be a better option.

Jim
 

James Thomas

"NO CLASS"
Re: Ultimate Ver. 7 & Code 59?

leroy said:
Each code 59 bin takes twice as much space as an ultimate bin. I'm not that familiar with the Ultimate hardware, but I would guess it would work, or could be made to work. The display would not be accurate, and you would only have room for half as many options. The Moates switching hardware may be a better option.

Jim


Ok thanks for the info. As to why the display would not be accurate..... why is that?
I don't think I need all 16 switches. Even if it was 8-10 that would be fine, one for econo / daily mode, one for max effort Super Unleaded :rotf: and then several for higher octane / alky / N.O.S. / boost. Ya think it would handle that if the display thing can be worked out?
I'm gonna call Moates and pick his brain for a minute on his switcher also.

Thanks!
_______
James
 

sytyguy

Moderated User
Re: Ultimate Ver. 7 & Code 59?

The Ultimate uses the following offsets:

0000, 4000, 8000, C000, 10000, 14000, 18000, 1C000, 20000, 24000, 28000, 2C000, 30000, 34000, 38000, 3C000

You could upload eight different code 59 bins while compensating for the offset (0000, 8000, 10000, 180000, and so on....) and get it to work if the Ultimate handles such. Todd, does the Ultimate have a 16kb window only or would it read a 32kb file, if say, double skipped all the way through? For some reason I want to say it's limited to 16kb only.

Moates has a pass through jumper which allows the use of 32kb bin files, so the G3 will definitely work. If the Ultimate could be made to work, then you could correct the display if you are into pic programming (that's what the display uses). Fairly easy stuff.

My advice, get a G3, get a 29C256 eeprom, and pop the G3 into pass through mode. Emulate till your ready, then burn your bin onto the eeprom. Never UV erase again, and a ZIF socket makes eprom changes uber-simple.

Hood
 

turbodig

Active member
Re: Ultimate Ver. 7 & Code 59?

sytyguy said:
The Ultimate uses the following offsets:

0000, 4000, 8000, C000, 10000, 14000, 18000, 1C000, 20000, 24000, 28000, 2C000, 30000, 34000, 38000, 3C000

You could upload eight different code 59 bins while compensating for the offset (0000, 8000, 10000, 180000, and so on....) and get it to work if the Ultimate handles such. Todd, does the Ultimate have a 16kb window only or would it read a 32kb file, if say, double skipped all the way through? For some reason I want to say it's limited to 16kb only.

Moates has a pass through jumper which allows the use of 32kb bin files, so the G3 will definitely work. If the Ultimate could be made to work, then you could correct the display if you are into pic programming (that's what the display uses). Fairly easy stuff.

My advice, get a G3, get a 29C256 eeprom, and pop the G3 into pass through mode. Emulate till your ready, then burn your bin onto the eeprom. Never UV erase again, and a ZIF socket makes eprom changes uber-simple.

Hood


Dunno for sure on the ultimates, but the later gauge-style boards looked an awful lot like a Moates G3 without the jumpers. If it can support the extra address line to go from a 27c2001/27c020 to a 29c040, it should be all set. It may be possible to re-pin that gauge-style cable to work with a moates G3, if nothing else.

If it does 16k steps, though , basically every other position will work.

Never had a radar-style to play with, so I can't say there. The old box-style ones would involve a bit of wiring to work.

Later,
 

sytyguy

Moderated User
Re: Ultimate Ver. 7 & Code 59?

turbodig said:
If it does 16k steps, though , basically every other position will work.

Never had a radar-style to play with, so I can't say there. The old box-style ones would involve a bit of wiring to work.

Kinda what I was thinking but didn't know if there was a "window" from, say 0000-3FFF and that the carrier wouldn't see beyond that 16384 byte "window" (making it blind to the other 16k of code.) I may have an old LCD Ultimate lying around. If I do, I'll give it a try with $59, just for others' sake.

Hood
 

James Thomas

"NO CLASS"
Re: Ultimate Ver. 7 & Code 59?

Thanks for the info guys! If you are going to play with this, please let me know as it may be a while until the full release of code 59 and I am just trying to get my game plan (parts list) together.

Thanks!
______
James
 
Top