What did you do to your SY/TY today?
- Thread starter SloGN
- Start date
- Status
WyoSyclone
Active member
Re: What did you do to your SY/TY today?
I looked at it and wondered if the left front tire had lost a few pounds over the Winter... looked outside at the frickin' snow falling and decided not to waste my time checking the pressure.....
I looked at it and wondered if the left front tire had lost a few pounds over the Winter... looked outside at the frickin' snow falling and decided not to waste my time checking the pressure.....
![Quickstop [UK]](/data/avatars/m/5/5165.jpg?1570199786){kind=avatar}
Quickstop [UK]
Combating adversyty.
Re: What did you do to your SY/TY today?
removed PS bracket, installed hydroboost lines, reattached PS bracket, installed PCS TCU under centre console and re-attached console. Mocked up rear and removed internal quarter for battery relocate tomorrow/Tuesday, removed AC box to gain access for heater core replacement and AC box replacement. Phew....
removed PS bracket, installed hydroboost lines, reattached PS bracket, installed PCS TCU under centre console and re-attached console. Mocked up rear and removed internal quarter for battery relocate tomorrow/Tuesday, removed AC box to gain access for heater core replacement and AC box replacement. Phew....
Captain Morgan
Moderated User
Re: What did you do to your SY/TY today?
I actually MOVED my typhoon today, about 25 feet. Took a battery charger on 40 amps AND a fully charged jumper pack to get it going
I actually MOVED my typhoon today, about 25 feet. Took a battery charger on 40 amps AND a fully charged jumper pack to get it going
Quickstop [UK]
Combating adversyty.
Re: What did you do to your SY/TY today?
I haven't tried that. I did actually get to drive mine the other day - down the ramp attached to the winch
I haven't tried that. I did actually get to drive mine the other day - down the ramp attached to the winch
graham1524
Well-known member
Re: What did you do to your SY/TY today?
i backed it down my driveway in neutral to play some basketball
i backed it down my driveway in neutral to play some basketball
SY-1193
Active member
Re: What did you do to your SY/TY today?
Today I hacked up my shifter console to fit my PCS Trans Controller in. I read thru and looked at the pictures from other people who did this install. I of course have to do things the hard way...
Pic 1 Pic 11 Pic 21
Pic 2 Pic 12
Pic 3 Pic 13
Pic 4 Pic 14
Pic 5 Pic 15
Pic 6 Pic 16
Pic 7 Pic 17
Pic 8 Pic 18
Pic 9 Pic 19
Pic 10 Pic 20
Today I hacked up my shifter console to fit my PCS Trans Controller in. I read thru and looked at the pictures from other people who did this install. I of course have to do things the hard way...
I cut the sides out of the console metal piece in the space between the shifter and the storage box in the console. It was too tight to fit in there so I cut, bent the metal out and welded in some scrap pieces to make it fit.
Pic 1 Pic 11 Pic 21
Pic 2 Pic 12
Pic 3 Pic 13
Pic 4 Pic 14
Pic 5 Pic 15
Pic 6 Pic 16
Pic 7 Pic 17
Pic 8 Pic 18
Pic 9 Pic 19
Pic 10 Pic 20
Captain Morgan
Moderated User
Re: What did you do to your SY/TY today?
Typhoon in its new parking space :lol:
Typhoon in its new parking space :lol:
BigBadSmoosh
Picking fights on I-65 since 2013
Re: What did you do to your SY/TY today?
I put the suspension back together after the truck sat in my driveway for a week under a cover. The updates to Turbotime's stock a-arm coil-over kit work great, the install is a little harder but overall i'm very happy with the changes.
I put the suspension back together after the truck sat in my driveway for a week under a cover. The updates to Turbotime's stock a-arm coil-over kit work great, the install is a little harder but overall i'm very happy with the changes.
warmpancakes
New member
Re: What did you do to your SY/TY today?
fixed the rh rear cladding, and glass beaded the trans inspection cover
fixed the rh rear cladding, and glass beaded the trans inspection cover
43t_ftw
Member
Re: What did you do to your SY/TY today?
how hard is the install, how much modding does it require with the stock a-arms?
what about the ride quality, did you go with the dual spring setup, or what spring rate did you get...
sorry about all the questions but i want to order a set next week and don't know what ones to go with :lol:
how hard is the install, how much modding does it require with the stock a-arms?
what about the ride quality, did you go with the dual spring setup, or what spring rate did you get...
sorry about all the questions but i want to order a set next week and don't know what ones to go with :lol:
Don W.
Stab it and steer it
Re: What did you do to your SY/TY today?
No pics but mocked up the motor with upper intake, Upper IC (to align brackets), (stock for now) turbo, first piece of DP, Dist., some other stuff. Then got called to work. Next will route and secure plug wires. (Much easier with motor not in truck.) Will post some pics as the thing actually goes together.
No pics but mocked up the motor with upper intake, Upper IC (to align brackets), (stock for now) turbo, first piece of DP, Dist., some other stuff. Then got called to work. Next will route and secure plug wires. (Much easier with motor not in truck.) Will post some pics as the thing actually goes together.
HiPerformanceHill
New member
Re: What did you do to your SY/TY today?
I bought a fp gauge, checked fp, redid some vac lines, rerouted some other wires that previous owner did poorly, I found the terminal on my coil was shot, replaced that with a spare that I had, replaced poor cap and rotor, removed my manual boost control and hooked up the vac lines the the stock boost controller. No engines codes and perfect boost pressure! :tup:
I bought a fp gauge, checked fp, redid some vac lines, rerouted some other wires that previous owner did poorly, I found the terminal on my coil was shot, replaced that with a spare that I had, replaced poor cap and rotor, removed my manual boost control and hooked up the vac lines the the stock boost controller. No engines codes and perfect boost pressure! :tup:
Re: What did you do to your SY/TY today?
i sandblasted and powdercoated all of my control arms, sandblasted all the bolts/washers/nuts. Also powder coated my steering bar, water neck, ic bars, water pump pulley and alt brace. Also bolted up my manual brake master cylinder. Derusted the output shaft of my 4l80e.
thats like 4 months work for me...all in 1 day!
i sandblasted and powdercoated all of my control arms, sandblasted all the bolts/washers/nuts. Also powder coated my steering bar, water neck, ic bars, water pump pulley and alt brace. Also bolted up my manual brake master cylinder. Derusted the output shaft of my 4l80e.
thats like 4 months work for me...all in 1 day!
- Status