What intercooler pump are you running?

WyoSyclone

Active member
Re: What intercooler pump are you running?

This is what I was talking about, probably a waste of money but I wanted to do it. Now I want to see it work.
Right.jpg


Please direct me to the member(s) that have done as I have and I will direct my questions toward them via PM, so that I will no longer bother you with this small matter. However, I kinda would like some guidance.

That looks like it will work :tup:
I would think that if you have enough fluid capacity on the cooling side and move it fast enough to extract the heat from the upper IC you should be in good shape. I know the Dutchty lower made a big difference in my Sy.
It will be interesting to see what effect it has on your engine cooling.
 

turbodig

Active member
Re: What intercooler pump are you running?

That looks like it will work :tup:
I would think that if you have enough fluid capacity on the cooling side and move it fast enough to extract the heat from the upper IC you should be in good shape. I know the Dutchty lower made a big difference in my Sy.
It will be interesting to see what effect it has on your engine cooling.

Looks like a nice setup to me, too. I kinda think that if you run it parallel with the stock one, the stock one won't end up doing much. Might be better off using the stocker as the first stage, and the new cooler as the second.

Extra liquid volume, and extra cooling surface area will help. Especially if you have a big enough pump to push it through.

I was always gonna do something similar with a rear heater core from a school bus.
 

carVSsuv

New member
Re: What intercooler pump are you running?

Thanks for the link.. I will probably try a shurflo first as i like more water flow.


I have used the Johnson and the Surflo. The Surflo is cooling better for me. It also primed itself. The Johnson took me a long time to get the air out of the system for me.Here are a few for sale.


http://cgi.ebay.com/ebaymotors/Shur...5fRVQ5fTrailerQ5fCamperQ5fPartsQ5fAccessories


http://cgi.ebay.com/ebaymotors/Shur...5fRVQ5fTrailerQ5fCamperQ5fPartsQ5fAccessories


http://cgi.ebay.com/ebaymotors/SHUR...5fRVQ5fTrailerQ5fCamperQ5fPartsQ5fAccessories
 

CavScout

Member
Re: What intercooler pump are you running?

Looks like a nice setup to me, too. I kinda think that if you run it parallel with the stock one, the stock one won't end up doing much. Might be better off using the stocker as the first stage, and the new cooler as the second.

Extra liquid volume, and extra cooling surface area will help. Especially if you have a big enough pump to push it through.

I was always gonna do something similar with a rear heater core from a school bus.

It does flow from bottom to top, using the stock as a starter then up to the fabricated one. The johnson pump is not helping and I was thinking the flow is too low (or I haven't gotten all of the air out). So I was thinking of finding a pump that can move more GPM or using the ShurFlo I have sitting.

Interested in hearing about the heater core from a bus, never occured to me but I have never seen one either.
 

WyoSyclone

Active member
Re: What intercooler pump are you running?

It does flow from bottom to top, using the stock as a starter then up to the fabricated one. The johnson pump is not helping and I was thinking the flow is too low (or I haven't gotten all of the air out). So I was thinking of finding a pump that can move more GPM or using the ShurFlo I have sitting.

Interested in hearing about the heater core from a bus, never occured to me but I have never seen one either.

running it bottom to top creates quite a bit of 'pressure' for that pump to push through... you might try top to bottom... that would give you a good bit of 'head' on the pump, and it would eliminate air pocket problems... I think.
 

ghettosled

SYTY SUPERSTORE
Re: What intercooler pump are you running?

more flow is better for cooling.. the HF one flows alot, but is very loud and of course HF quality. Had a local truck come in recently with one, and when you popped the cap off it looked like a washing machine on full blast. Actually cooled half way decent for a stock a/l setup. Took some plumbing to get it rigged up though, not a direct replacement.
 
Top