Will it run?

[Don W.]

Procrastinated a bit to much so my rebuild might be all in and I won't be able to start it 'cuz I won't have my chip from Mike. Will a Sy run for break-in purposes with stock inj's, 2 bar, stock chip, Vortec heads and a 412 cam? I thought I throw this out there. If it will run might not that be a good way to break it in? Otherwise I can just wait.

TIA

 

[TYTILIDIE]

Re: Will it run?

I think it would run rough but don't see why it wouldn't start at least. Thought you were going code59?

 

[Don W.]

Re: Will it run?

I think it would run rough but don't see why it wouldn't start at least. Thought you were going code59?

After much consideration I decided to go with Mike. I like his take on things, I've met him personally so just decided. We'll see how it all works out.

 

[turbodig]

Re: Will it run?

Procrastinated a bit to much so my rebuild might be all in and I won't be able to start it 'cuz I won't have my chip from Mike. Will a Sy run for break-in purposes with stock inj's, 2 bar, stock chip, Vortec heads and a 412 cam? I thought I throw this out there. If it will run might not that be a good way to break it in? Otherwise I can just wait.

TIA

It'll be just fine. Stay out of boost, and you'll have no problems. Maybe wire your WG open so you can't get boost, if you're really paranoid.

 

[Don W.]

Re: Will it run?

Thanks Dig. Won't have any probs keeping my foot out of it. :tup:

 

[ghettosled]

Re: Will it run?

the idle may be a bit rough but it should be fine as mentioned. Only issue would be trying to run 50# injectors with a stock injector prom, or a 2 bar chip with a 3 bar sensor.. etc.