WTB: Block and Crank

sy381

Member
Just what the title says. I need a block and crank. With-in driving distance from my location. I dont want to deal with shipping. A block with the machine work done would be a plus.
 

ViciousV6

400HP/550FTLB
Re: WTB: Block and Crank

What kind of build.

I got block with splayed caps .030 bore already --- had spun bearing so it would need new caps and align bore, block otherwise in good condition. Got Stock Crank .010 under with clevite77 bearings for mains and rods.

If you get a crack in the crank it will destroy your motor no matter what main caps you have. I snapped a crank but luckily i noticed a bit of smoke so iknew we popped a head gasket which was caused by the crank.

$500.00 For Block and Crank.

I paid 300.00 for Crank and bearings

Ralph
Toms River, NJ 08755
Boostinblazer92@aol.com
 
Last edited:

Sy-1177

Turbo Inside
Re: WTB: Block and Crank

I have a complete engine out of my SGT that i'd sell. I'm over in Cleveland. It has 150k on it but ran fine when pulled.
 

sy381

Member
Re: WTB: Block and Crank

What kind of build.

I got block with splayed caps .030 bore already --- had spun bearing so it would need new caps and align bore, block otherwise in good condition. Got Stock Crank .010 under with clevite77 bearings for mains and rods.

If you get a crack in the crank it will destroy your motor no matter what main caps you have. I snapped a crank but luckily i noticed a bit of smoke so iknew we popped a head gasket which was caused by the crank.

$500.00 For Block and Crank.

I paid 300.00 for Crank and bearings

Ralph
Toms River, NJ 08755
Boostinblazer92@aol.com

I want splayed 4 bolts and a treated crank. I have a set of bullit splayed caps already i bought years ago. I want the strongest bottom end as possible. Sounds like a possibility to me.
 

jwaller

Evil Genius/SyTy Guru
Re: WTB: Block and Crank

I want splayed 4 bolts and a treated crank. I have a set of bullit splayed caps already i bought years ago. I want the strongest bottom end as possible. Sounds like a possibility to me.

send me the caps and I'll send the block back with them on it plus crank for 650 shipping included.
 

BBW808

New member
Re: WTB: Block and Crank

I have a block and crank and can have it bored, machined and whatever else you'd like done. LMK
 
Top