0966Sy
Code what?
I forgot to ask, what is the front hole on the fender for? That's what I was hoping, that you where doing this using the SYTY PTE housing. Looking forward to the wastegate/downpipe setup
Typhoon #1215 Mods
- Thread starter Sean Krupa
- Start date
I forgot to ask, what is the front hole on the fender for? That's what I was hoping, that you where doing this using the SYTY PTE housing. Looking forward to the wastegate/downpipe setup
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
The wastegate pipe is goin out that hole. Will be using the same PTE 39mm wg also :tup:
The wastegate pipe is goin out that hole. Will be using the same PTE 39mm wg also :tup:
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Thank you Zack! Hopefully one day I'll get to see your collection!
Thank you Zack! Hopefully one day I'll get to see your collection!
Six-is-Enough
Use to do a little Boost
Re: Typhoon #1215 Mods
I like it. Looks cool.
I like it. Looks cool.
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Got my 4L80e built from my local trans shop that built my 700r4 to hold into the 10s. I supplied them with a Jakes Performance Stage 3 Kit with the Billet Input shaft. They also installed the Sonnax Short Shift shaft and Sonnax PR Valve. All the Sensors and wiring was replaced and they were nice enough to Paint it! Installed John's Billet Adaptor and Mocked up the Billet Circle D converter.
Got my 4L80e built from my local trans shop that built my 700r4 to hold into the 10s. I supplied them with a Jakes Performance Stage 3 Kit with the Billet Input shaft. They also installed the Sonnax Short Shift shaft and Sonnax PR Valve. All the Sensors and wiring was replaced and they were nice enough to Paint it! Installed John's Billet Adaptor and Mocked up the Billet Circle D converter.
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Painted the Trim Ring Satin Black to give it more of a Stealth look. The Stainless button head allen screws really make it Pop, reminds me of a Fighter jet with Rivets for the panels.
Painted the Trim Ring Satin Black to give it more of a Stealth look. The Stainless button head allen screws really make it Pop, reminds me of a Fighter jet with Rivets for the panels.
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Got the Monster 2.0 Engine back at Home!! In case some have missed the Details, its a 4 Bolt main, Block Fill, Treated Crank, Forged DSS High Compression Pistons, Eagle Rods, Brodix -8 Ported Heads, Cometic Gaskets, Custom Cam.
Mark was nice enough to pick up the Engine in his Ty which he got his Engine built at the same shop. Pickin it up in Style! Excited to have it back and mocked the goodies on for now and will be installing the Lower intake next and accessories. My Stef's Oil Pan will be here next week, then I should be ready to drop this Bad boy in!
Got the Monster 2.0 Engine back at Home!! In case some have missed the Details, its a 4 Bolt main, Block Fill, Treated Crank, Forged DSS High Compression Pistons, Eagle Rods, Brodix -8 Ported Heads, Cometic Gaskets, Custom Cam.
Mark was nice enough to pick up the Engine in his Ty which he got his Engine built at the same shop. Pickin it up in Style! Excited to have it back and mocked the goodies on for now and will be installing the Lower intake next and accessories. My Stef's Oil Pan will be here next week, then I should be ready to drop this Bad boy in!
syclonejim
New member
Re: Typhoon #1215 Mods
Sean, build is looking great, can't wait to see what kind of times you achieve with the new engine!
Sean, build is looking great, can't wait to see what kind of times you achieve with the new engine!
e95 Ty
New member
Re: Typhoon #1215 Mods
Sean, whats up buddy
. Figured with the new build i'd come out of hiding and see whats new on here..
Truck looks great except for the crap I texted you about lol..It's your baby bud, build it your way.
Good luck with it and lets see what she runs. I'm ready for a little excitement!! Ty0021 been sitting long enough now...
Like I keep saying..Bring em on..Im more than ready lol :tup:
Sean, whats up buddy
. Figured with the new build i'd come out of hiding and see whats new on here..Truck looks great except for the crap I texted you about lol..It's your baby bud, build it your way.
Good luck with it and lets see what she runs. I'm ready for a little excitement!! Ty0021 been sitting long enough now...
Like I keep saying..Bring em on..Im more than ready lol :tup:
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Matt!! I'm glad you're back. I know you're just messin, the Exhaust isn't for everyone, just a fender anyways. Plus it's already aftermarket.:tup:
On a Serious note, I'm ready to teach an old dog some new tricks. :rotf: Let 2017 be the year for some super fast trucks.
Matt!! I'm glad you're back. I know you're just messin, the Exhaust isn't for everyone, just a fender anyways. Plus it's already aftermarket.:tup:
On a Serious note, I'm ready to teach an old dog some new tricks. :rotf: Let 2017 be the year for some super fast trucks.
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
Received my Stef's pan after 6+ weeks. Was the last piece I've been waiting for so I can finally install this Bad Boy.
Received my Stef's pan after 6+ weeks. Was the last piece I've been waiting for so I can finally install this Bad Boy.
Sean Krupa
Moderator
Re: Typhoon #1215 Mods
The Stefs pan holds 7 quarts to help keep things cool. Also helps keep Oil from splashing on the crank to reduce friction. Has a trap door so the pump doesn't starve, also you don't have to beat the heck out of the pan like you do the stock pan for rod clearance.
The Stefs pan holds 7 quarts to help keep things cool. Also helps keep Oil from splashing on the crank to reduce friction. Has a trap door so the pump doesn't starve, also you don't have to beat the heck out of the pan like you do the stock pan for rod clearance.
Last edited:
IRVIN COLON
New member
Re: Typhoon #1215 Mods
Looks great that alluminum pan how much $$$ was
Looks great that alluminum pan how much $$$ was