Search results

  1. George Blake

    well.. i blew the tranny again

    Re: well.. i blew the tranny again You've already bought the stuff. Not sure why you asked. You'd be MUCH better off just using the 2007 trans with the adaptor and controller. If your trans is seized, it's done. I mean, not rebuildable done. The sun gear is pressed into the sprag. If it's...
  2. George Blake

    well.. i blew the tranny again

    Re: well.. i blew the tranny again The input drum and everything associated with the input drum is different in the 2007. Read the following and see if it appeals more. Don't use any pieces out of the 700r you've broken except the servo. They will be bent, cracked, heat warped, don't use it...
  3. George Blake

    well.. i blew the tranny again

    Re: well.. i blew the tranny again You've broken the rear planetary (probably more) and it's now bound and won't move. I doubt if you welded anything unless it ran without lube and melted the front sun gear in. If you've done that, might as well pull the valvebody, governor, servo lineup and...
  4. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard Yep. Doesn't hurt to check.
  5. George Blake

    Wow

    Re: Wow $5000 was just a number. When you donate, you can see the bar percentage go up and actually see you made a difference. I seriously doubt it costs $5K a year but it may take them 6 years to reach that number. I still don't see why this got people mad enough to say the things they did...
  6. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard Yeah, I'm thinking he meant PATC. They have their own brand of multi clutch converters. If it DID come from PTC, I wouldn't be locking it up at WOT but that'll be the supplier's call. Locking up a small diameter single clutched converter will...
  7. George Blake

    Wow

    Re: Wow It looked pretty clear that vettandtyphoon is claiming that it should only be costing syty.net admin $300 a year for this forum. Servers,harware,software,time spent by a human to do that stuff, should be free. I say let him do it and check the reality and see if it's still there 2 years...
  8. George Blake

    5 pinion billet planetary for the 4472

    Re: 5 pinion billet planetary for the 4472 Updated Participant list. Just a reminder, these will be done December 14th. It'll be a nice Christmas present. Put the sun gear shaft in the planetary along with a 32 spline billet input shaft and tell your wife it's man's Christmas candle holder.
  9. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard That's weird. It almost looks like the seam has been pried open. But the main thing is that your setup is sitting way toward the rear of the truck. Like over an 1". I have stock mounts and my T-case just barely reaches the curve that you...
  10. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard PTC told me they didn't make multi plate converters and TCS doesn't make multiplate converters. Precision Industries made the one in the above pic. So yours is nothing like Jeremy's.
  11. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard There is an indexing ring on the plate. You CANNOT move the plate up and down. The holes are off center because NONE of the holes are equidistant from the centerline. For some reason your truck's body is sitting 1" or so lower than everyone...
  12. George Blake

    CRYO Treating Applications and Benefits

    Re: CRYO Treating Applications and Benefits The process works. I don't know about the plastic stuff but I can vouch for the steel and aluminum parts. For example, when I was figuring out what to do with the overrun clutch hub in the 700r4, I had a unit cryo'd, then hit with 700hp for about 3...
  13. George Blake

    chronic broken left front axle

    Re: chronic broken left front axle I don't do the parts for the differential. I'm afraid what your gonna find is that the front diff was empty of fluid. I do the transmission,transfercase, driveshaft components. I'm covered up with that. ANYTHING you need in the trans or T-case or propshaft...
  14. George Blake

    Syclone article on Motivemag.com

    Re: Syclone article on Motivemag.com Good eye:D
  15. George Blake

    chronic broken left front axle

    Re: chronic broken left front axle I believe there is something broken in the front diff. You are either catching a piece of broken cast iron in there or there is excessive play and it's not allowing the gears to mesh. Problem is that there is no telling what this has done to the transfer case...
  16. George Blake

    PCS tranny controller for 4l60e/4l80e

    Re: PCS tranny controller for 4l60e/4l80e You don't use the coolant wire You don't use the speedo out You don't use the dyno You don't use the cancel O/D You don't use the CAN LINK with the stock ecm You don't use the SCU that's only for fords You don't need the MAP You hook up the TPS as...
  17. George Blake

    5 pinion billet planetary for the 4472

    Re: 5 pinion billet planetary for the 4472 Brandon Eldred (Paid In Full for everything) X2 setups Robert Stevenson (Paid In Full for everything) Keith Watson (Paid in Full for everything) David Enama (Paid in Full for everything) Jamie Hacking (Paid in Full for everything) David Saunders (Paid...
  18. George Blake

    240sx +lsx+ syty?

    Re: 240sx +lsx+ syty? Naw, he used a trailblazer SS front diff, and kept the transfer case. The BW is smaller externally than the ss case.
  19. George Blake

    Transfer case may be busted

    Re: Transfer case may be busted Forgot. You don't check the bearings by wiggling them. You spin them. You should hear a nice "shhhhhhhhhhhhh" and it should slow to a stop. Not just stop like someone put the brake on. If it screeches or vibrates at all, the bearing is bad. For example, hold the...
  20. George Blake

    4l80e - transfercase touching the floorboard

    Re: 4l80e - transfercase touching the floorboard I knew it was yours. I was just admiring my work :) I did slave over that one after all.
Top