3 Bar or 2 bar identifying

etriebe

New member
Hey just got my truck running and it is running really rich. I have a couple map sensor sitting here and forgot which one is the three bar. how can I tell the diff? Thanks for the help.
 

Silly

Banned
Re: 3 Bar or 2 bar identifying

was talking about this the other day actually, interested to know as well
 

SYO237

SyTy Registry
Re: 3 Bar or 2 bar identifying

mapsensor.jpg
 

Loeryder

New member
Re: 3 Bar or 2 bar identifying

also if you look at the plug on the bottom.

black plug = 3 bar
orange plug = 2 bar.
 
Last edited:

etriebe

New member
Re: 3 Bar or 2 bar identifying

Well thanks, I found out I have A 1 Bar and a 2 bar. I can't find my 3 bar at all. Crap 65 bills down the drain.:tdown:
 

SY2932

Administrator
Re: 3 Bar or 2 bar identifying

Is that correct? My stock 2 Bar MAP is orange and I have a 3 Bar MAP that is black.

I think he's got the colors reversed because that is what color mine are too:

IMG_0250.sized.jpg

"MAP sensors, stock 2 bar on left #16009886 and 3 bar on right old number is #16040749 new # is #12223861. On the topside where the plug connects, there is a number for identification. 1 bar MAP=039, 460, 876 or 883. 2 bar MAP=012, 539, 609, 701, or 886. 3 bar MAP=749 or 861. The 4 digit number to the right refers to the date of manufacture "1100"= 2001, 100th day of the year."

You can't really go by the plug color for identification, the numbers that are melted into the housing are the only way to be sure what you have.
 

Loeryder

New member
Re: 3 Bar or 2 bar identifying

Is that correct? My stock 2 Bar MAP is orange and I have a 3 Bar MAP that is black.

Sorry, had the colors swapped.
I didn't have a sensor in front of me.
And this should come as a 2nd method of determination after you have checked the above method.
 

etriebe

New member
Re: 3 Bar or 2 bar identifying

I just received my 3 bar from mike at RPM and the plug color is orange and my 2 bar plug is black and neither of them have the three digit code by the plug. My two bar has a big white sticker on the bottom with the new part number on it and my 3 bar has nothing on it. Weird
 

Ian Turgeon

Cascading Inspiration
Re: 3 Bar or 2 bar identifying

I still don't think there is any reliable way to tell visually. I plug it in and check what pressure the computer is seeing w/o the engine running... if its correct for your elevation.
 

SY-1193

Active member
Re: 3 Bar or 2 bar identifying

Here is something else to add to the pile:
Your factory boost gauge will read slightly into vacuum below "0" or below center with the 3-bar installed as compared to the 2-bar which would read "0" right at center because of the difference in the map sensor with the key turned on (engine not running).
 
Top