jklein68
Donating Member
When does it make sense to consider an aftermarket computer setup like BS3 vs. running a Code $59 setup. I am in the process of acquiring parts for my engine build and am debating the options.
I plan on upgrading to a 4L80e which will require a Transmission Control Unit. TCI retails at around $900 with the wiring harness. The Code $59 stuff is about $330 on moates plus a WB02 for $200. On the other side a BS3 goes for $2,750 on sytyperf.com and will run the engine and the trans.
Will the BS3 or similar be $1,500 - "Better"?, "Easier"?, Both? vs. a Code $59 and TCI Setup?
I am trying to build a solid 500 - 600HP truck that's drivable.
Thanks!
I plan on upgrading to a 4L80e which will require a Transmission Control Unit. TCI retails at around $900 with the wiring harness. The Code $59 stuff is about $330 on moates plus a WB02 for $200. On the other side a BS3 goes for $2,750 on sytyperf.com and will run the engine and the trans.
Will the BS3 or similar be $1,500 - "Better"?, "Easier"?, Both? vs. a Code $59 and TCI Setup?
I am trying to build a solid 500 - 600HP truck that's drivable.
Thanks!
Last edited: