WyoSyclone
Active member
Re: Knock issue
Unless the 3-bar was patched into the ECM it wouldn't make a difference on the logs; your boost gauge would read correctly but that wouldn't affect the DM/TPRT logs.
After talking with my dad, he remembers him and Ivan from back in the day were hooking up some gauges and the ATR aux intercooler. This was in 1998. My dad has a log of all the updates since 1994. It seems that Ivan hooked up a 3 bar map sensor which I verified the part number today T'ing into the vacuum line going from the AFPR to the stock 2 bar map sensor. Reading on the Sytyarchives it seems this is not recommended and I am wondering why they used a 3-bar map sensor for the aux. boost gauge. My dad doesn't remember. After taking off some electrical tape I noticed one of the the 3-connectors was broken. I don't know if I broke it or it was like that. They used some push type electrical pins crimped onto the lines. Could this possible be some of my knock problems?
Still waiting to hear from Hood on a tune.
Thank You,
Unless the 3-bar was patched into the ECM it wouldn't make a difference on the logs; your boost gauge would read correctly but that wouldn't affect the DM/TPRT logs.