Need help...

wantingasy

Active member
Alright, I just bought a TY and it came with an old laptop(not sure if it works) and also the cables for datamaster. I have a newer laptop that I would like to use it with. The port under the dash is already there, so I just have to plug it in I guess. I'm not familiar with these things at all and I've never used one. How should I go about using datamaster and installing all the stuff I need?
 

Mephisto

These trucks are cursed
Re: Need help...

well if you have a newer laptop... your going to need to install the datamaster software on the new laptop... www.ttspowersystems.com

you can run datamaster 20 times i think until you need a registration code... you're on your own there...

as for hookin up the cable... just plug the cable into the ALDL port under the dash and depending on what cable you have... (i have the serial cable) plug the other end into the back of the laptop...

once everything is hooked up, open datamaster. go to the file menu, and select record data. most likely you'll get a pop saying you need to select a comport... theres another menu up top i cant remember what its called but theres something like "connections" and there will be a list of comport 1, comport 2 etc... one of those will work. once the computer is reading properly you should be good to go.

if you have any probs, theres quite a few nor cal guys up there that you could get ahold of for some help... but you might have to drive awhile from arcata.

HTH!

btw hit up a mod to change your name... now that you've got a ty... unless you're still wanting a sy :)
 

wantingasy

Active member
Re: Need help...

Thanks. I'll try that and see what happens. What's the most important thing I should be looking at when I get it going?
 

Mephisto

These trucks are cursed
Re: Need help...

knock, intake temps, fuel...

most likely you'll get some knock, cause of CA's shitty 91 oct.
 

wantingasy

Active member
Re: Need help...

The connector isn't going to work with my newer laptop. I think it's the older version. It looks like the connector that a monitor uses to plug into the tower. Where can I get one that will work with a newer laptop? Oh yeah, that old laptop does work. I found the cable to plug it into the wall and it started, but it's like ms-dos. It's a "Compaq LTE Elite 4/50E" It has the right port for the datamaster though. I just don't know how to work the thing. :oops:
 

Flyin Ryan

hated cuz he drives fords
Re: Need help...

You can use Datamaster all you want to view/monitor your engine but you can only record a few times before you have to purchase a license for it. You can still monitor with it if you used up all the free record sessions.

The cable you have that won't fit your newer laptop is this. http://www.ttspowersystems.com/adapt_cable.htm

There are USB to serial adapters availible.

For the old laptop you have you could try one of these http://www.moates.net/product_info.php?cPath=32&products_id=61

Or for the newer laptop you could try the adaptor like these
http://search.ebay.com/search/searc...r=1&from=R8&satitle=usb+to+serial+&category0=

Good luck
 

wantingasy

Active member
Re: Need help...

The last link that you put for my newer laptop, I don't think that one will work. The cable I have now has like an interchangeable end that is round. I'll have to take out the digital camera and take a picture. The order of the cable is computer looking connector----> round interchangeable port----> the connector on the end that plugs into under the dash
 

Don W.

Stab it and steer it
Re: Need help...

Howdy from Santa Rosa, That puter should run Window 98 fairly well. That's all you need for Datamaster. If the cable connects like you said then Datamaster should work. PM me if you'd like and I'll see if I can help. We could even try that contraption called the telephone.
 

Flyin Ryan

hated cuz he drives fords
Re: Need help...

wantingasy said:
The last link that you put for my newer laptop, I don't think that one will work. The cable I have now has like an interchangeable end that is round. I'll have to take out the digital camera and take a picture. The order of the cable is computer looking connector----> round interchangeable port----> the connector on the end that plugs into under the dash

hmm round end that's interchangable.. can't picture what it is in my head. My datamaster cable from the ttspowersystems company is just the norm serial connect (laptop) to ALDL (dash service port)
 

wantingasy

Active member
Re: Need help...

Alright, I'll bust out the digital camera tomorrow and take a pic of my cable. The old laptop has ms-dos, so I would have to install windows 98 if it will even accept that. I would like to use the newer dell laptop though, so I guess I'll have to figure out which connector I need for it. Thanks. Will post pics tomorrow.
 

Flyin Ryan

hated cuz he drives fords
Re: Need help...

Well if you want to use the newer dell laptop then lets deal with that. Get a pic or two of the cable your talking about and we'll take it from there.
 
Re: Need help...

wantingasy said:
Alright, I'll bust out the digital camera tomorrow and take a pic of my cable. The old laptop has ms-dos, so I would have to install windows 98 if it will even accept that. I would like to use the newer dell laptop though, so I guess I'll have to figure out which connector I need for it. Thanks. Will post pics tomorrow.

Have you tried typing win at the DOS prompt to see if Windows loads up?
 

wantingasy

Active member
Re: Need help...

I'll try typing that in and see what happens. I don't know dos very well. I took a pic of the cable but I'm not sure how to post it on here. I'll try, if not I'll email it to somebody. It won't let me paste it, who should I email it to?
 

Flyin Ryan

hated cuz he drives fords
Re: Need help...

I got your email and your picture.. I don't know anything about the cable you have though. Maybe someone else does?
Here's the pic you emailed me.

datamastercable5ej.jpg
 

Don W.

Stab it and steer it
Re: Need help...

Not sure what the heck you've got there. Looks wrong to me but I've only seen mine. I'll get a photo up. Meantime If you could describe (photo is better obviously) the connection between the two cables it might help. The wiring diagrams I've seen require electronic goodies between the ADL and computer so I think you're missing something. Like maybe you have only part of a cable?
 

wantingasy

Active member
Re: Need help...

Hmmm...I'm not sure either. When I bought the ty I was told that was the cable for the datamaster and it came with an old laptop. Maybe turbobladz can help me out with this because I bought it from him. On the connector at the black end in small letters it says " GM 1982 & up" and it's made by RINDA technologies. Oh well, looks like I'll just be buying a new cable if I can find one. I can take another pic of just the connection in the middle of the cable, but it's just a connector with 5 pins inside of it.
 

dgoodhue

BuSTeD 4.3
Re: Need help...

Its Diacom cable not Datamaster. You can't use a newer laptop with Diacom, it need to be run in DOS mode...
 

wantingasy

Active member
Re: Need help...

Wow, that would explain why the old laptop that I got with it only runs in Dos mode. So how does this diacom cable and dos mode work? What can I do with it?
 

dgoodhue

BuSTeD 4.3
Re: Need help...

Type in Diacom at a c:\ prompt and it should run. Diacom does most the same things as Datamster but its not good graphically (diacom is actually more expensive but its outdated) Their are some thing in Diacom that I prefer over Datamaster.
 
Top